Search:

Brian, don't beat yourself up for not backing it up, it was late and wasn't too long after you ran that they closed the lanes anyway.

He's a few pics... Including one with you pleading to the car...

Looks good!

Polishing aluminum - yes
Chrome plating aluminum - HELL NO. Done right it's ok but if they do it wrong you'll be left with junk rims...

I have a set that came with my shadow that...

When everything is working there's very little benefit to an MSD. When everything's not working the MSD is amazing. I forgot that I didn't change my rotor in my old mustang when I did a tune up (out...

RB, Are you going to sell the coilovers for just the front or for all around?

IIRC it's like 7,500lb. I would keep it to the GVW of the truck, probably about 6400lb. I couldn't find anything that says a manual is less but it depends on the trans... So. On the newer ones with...

He's around but busy... That's a good thing in today's economy I guess. I recently stole his DP K frame and cleaned it up, welded and painted it. I also fought with seized control arm bolts...

As...

It was parked in a grass yard for 4 years with the windows down... Yeah it's a little rusty. Not as bad as you think but bad enough...

Its probably savable but would require lots of work and fab...

The car has louvers in the hood; it's a factory SP piece and it was parked due to electrical issues... In a field with the windows down...

My cousin's plan is to fight with Lucas, aka the prince...

My cousin just scored this... Chrysler 440's show up in the strangest places... This one is a 520ci 6-pack stoker.... The Jensen Interceptor is a hand made British sports car available with either a...

Thread hijack in progress... :p

On a Shadow assuming you roll the fender lips what's the biggest size you can go with?

I'm getting a complete axle from a 91 Spirit RT complete with brakes and swaybar, etc. Can I just swap the whole axle into my 94 Shadow or are they different?

I'm also getting the front brakes,...

The dual diaphragm is the same diameter but about 2" thicker. It typically would be used on a 4 wheel disc car. And no, the single doesn't block the clutch cable. My TBI Shadow is a single with a...

That's the cover he posted and said it was an "E" cover. I just quickly quoted it just in case you missed it. I've got a Super 50 with an E cover and it's huge compared to the one in the pic but I...

Chris, is this the measurement that you're looking for?

:amen:

Bet the CAI would fit with NO problems then... :D

How many people told you the Manual brakes were a bad idea and wouldn't work? When I decided to keep manual brakes on my Chevelle and just swap...

Yeah it turned into a pissing contest...

+1 on what Cordes said, it will make the pedal harder with a single diaphragm booster and 4 wheel discs... But here's the real question: How many people...

I never knew there where two boosters. You posted the dimensions of your booster and I looked at mine and they were different. It took two minutes at rock auto to find there were two main types,...

Thank you.

It's easier to find answers and possible solutions when you don't spend all your time trying to prove you're right. And just so no one thinks I'm singling people out, there is more...

Ok, there is apparently a single diaphragm booster and a dual diaphragm booster available for most TD cars... So this may not be an L body v P body issue, SS header v Cast header, Tranny buster v...

Nah I think it was one side huddling up to decide the next attack... :p

Ok, as for a tilt column to swap in place of the existing non-tilt column am I limited to P bodies or will columns from other cars fit?

FYI - Scatter Shield

1/4" plate and bolts need to be Grade 5 or better as per NHRA. Doesn't need to be SFI because no one commercially makes one.

In addition to the two 523's I have I now have a 568 for the car.... :) Thanks Sgt Craig. You're van will live on...

What will? Any of the columns from any of the cars?