Search:

I weigh around 350lbs..............Im overweight.

Official Weight Reading of my 90 Omni "Base" 2660lbs with me in it, a 12 gal air tank in the back for the air shocks "and soon to be bag overs in the front", and a 1/4 tank of fuel.

215/35R18's would be just about the right size.
air shocks on the back with no springs and Bag-over-Struts in the front should give the clearance.

I got 15" wheels on my Omni right now, Got some 18's needing to be plastidipped, but I dont plan on changing from the 4x100 bolt pattern any time soon.

the only reason I want vented is to stop these solid front rotors from warping, I am looking to upgrade the fronts to vented then maybe later on disc on the rear.

Thanks for the link! it helped a...

OK here is my deal I have a 1990 Dodge Omni "Base" I am trying to figure out how to put Vented Rotors on the front and have come up with no solution on just rotors so I have been looking at the GLH...

I got my ITB's"indevidual Throtle Bodies" almost ready I just need the lower part to a 2 piece intake Manifold so I can continue making the adapter for the ITB setup..

I found some Moog Wheel Bearings that I had pressed in thanks for the help though.

Just sayin my Omni is a 2.2Ltbi(soon to be ITB) 525_5SPD Weight unknown at this point.

I have a 1990 Dodge Omni and it needs new wheel Bearings, and I have found many different Assemblies available, but my question is.....will the front wheel Bearing assembly from a 1986 GLHT work in...

ok Thank you I will look at it After Welding class today.

OK my question is in Common blocks I have a 1990 Omni with a 2.2 TBI all factory and I assume it will be a common block, but I thought that common blocks have a large "C" Stamped on the block in the...

sweet! I am going to put a 2.2 DOHC hybrid in my 67 cuda to see what the V8 Swappers think,I know I will get hounded for it, and I hope I can get those type of numbers out of it.

just wondering is this a SOHC engine?

cool cool gotcha thats what ya'll are here for to help us un informed people out

but what 5 or 6 spd to use would be my next question........

---------- Post added at 08:29 PM ---------- Previous post was at 08:28 PM ----------

got it Trimic T56 from a...

OK so probably a 5 or 6 spd from a V8 or something simmilar..... and just use the bellhousing from the dakota

I have a RWD Project that I am working on and I am wondering about the Dakota 2.5L Transmission in 5 SPD form, like how much abuse they can take HP and TQ levels you know.....Just wondering.......I...

I Have a Slight hesitation when accelerating in 1st gear but in the rest of the gears it is not there, but it was an interesting test of cars, but like nomercy said we were dead matched until we...

:evil::evil:

OK next Question what 5spd is there that fits the 3.5 or the 3.3 or the 3.8?

here is my 90 Omni on the original 13" wheels.....
with air shocks on the rear "rebuilding strutover bags for the front"....
found some 4 lug pizza's I will be getting here in the near future.......

Ok I am just wondering from all who have the experience with V6's will a 3.0 Trans fit a 3.3........just wondering.......