I will second using Synchromesh. I have also used Redline MTL. The only reason I don't use it more is that it is not available locally... Royal Purple Synchromax is another option.
To be...
Type: Posts; User: c2xejk; Keyword(s):
I will second using Synchromesh. I have also used Redline MTL. The only reason I don't use it more is that it is not available locally... Royal Purple Synchromax is another option.
To be...
Are these forsale?
Any idea/recommendation on when these parts are needed? ie. at what hp/torque levels?
Throughout the video there were some short blips in the Ignition feed... do you have a higher res picture of that section? I don't see that narrow pulse causing a problem...
If you think...
When during the recording does the problem happen? Not sure if the recording has enough resolution to see an issue.
I would definitely tape the fuel pressure gauge to the windshield so you can...
Not to be too much of a broken record, but... Have you checked fuel pressure, have you captured a scope trace when the problem is occurring? A scope trace of fuel injector pulse, spark (primary or...
Did you ever install a fuel pressure gauge?
If you are getting RPM, then at least one of the position sensors is working. If the other one is failed it should be setting a code. (ie. it is faulting the primary RPM source and using the...
You need ZDDP (a zinc based compound) in the oil. So if the oil doesn't have ZDDP, you will need to get a ZDDP additive to put in.
Many oils for diesel engines may still have ZDDP, but I don't...
Ground side triggering (or low-side switching) means that 12v is constant and the computer controls the ground connection.
I will note that you can test fuel injector firing with a test light, but...
The Chinese made turbos generally come in a standard T3 or T4 pattern. If they are a proprietary design, it is for a current car... So that means to use either you will need to buy/make an adapter...
On a long crank, does the tach bump up? It should if the cam and crank sensor work. Also a scan tool should eventually register some RPM...
any particular reason? Tanks are generally pretty cheap these days.
I would assume that the ASD control line is a low side switched signal. Thus 200mV would be a turn on of the control side of the relay. (ie. current would be flowing toward the ECU.) 12v is...
What's with the ignition reference having a double pulse in the center? Is that right? (can't tell since another one would be off screen.) Quick reading indicates that is not right...
On the scope, did you also get a means to access the signals in the wires? ie a piercing probe or a means to back probe? (T-pins from Wal-mart can be a good way to back probe a connector.)
Given...
Time is also an issue for me too. Yesterday I went to start my Spirit R/T and nearly nothing... Grr, Sunday it started and ran beautifully. I think the issue is electrical, but I am digging to...
I haven't read through the whole thread, but right now you still having the car stumble. Have you determined what you are losing when this happens? ie. You need fuel, spark and compression. ...
Tentative plan is to bring 4 vehicles.
-91 Spirit R/T with a 3L V6 turbo (Greddy e-Manage) 5-sp
-94 Dodge Shadow 3L V6 (AT),
-89 Dodge Daytona with 3.5L 4 valve V6 (6g74) w/turbo...
Is there an easy way to convert a Pre-registration to a Pre-registration+1? Or is this best handled during check-in? Thanks
The other option is fabricating one out of common parts. http://www.turbo-mopar.com/forums/showthread.php?62562-Adjustable-panhard-bar-how-to-amp-part-numbers&highlight=Adjustable+panhard+bar I did...
With it running and the ECT plugged in, what does the scan tool indicate the spark advance is? And what is it really? (an adjustable timing light should allow you to check it.) If timing is truly...
I'm in for one. (PS. I don't spend much time on FB, so posting here is helpful!)
Sadly it doesn't look like ACT makes clutches for Turbo Dodges any more...
Are the minivan knuckles the same?
Not sure what is available in your area, but according to car-part.com there are a bunch available in my area for $35-40/knuckle....