Search:

Check out the product catalog, there is a square bulk connector, but unsure how common the terminals are or if it uses the barrel type ones. Product catalog link is in one of the links, just need to...

The picture is before I used the threaded nut and wave washer to secure them in place. I was just taking one for posterity since I don't do that great of a job documenting as I go.

This is a link...

I removed the 40 way and am running the Deutsch connectors in place of it. The gold headlight switch housing connectors work ok for the female replacement terminals, but there is a lot of play and if...

Are you referring to the female connectors for the 40 way through the firewall?

Sent from my Pixel 7 using Tapatalk

Oh ok. This is the one style I've been running for a while, would need to get the new pigtail to adapt, but good to know they are still widely available. :thumb:

What coil are you referring to? I see the thread for the speed sensor, was curious about the coil.

The 14892 is the closest thing to the female spade terminal mate. I believe I used these to get me by, but they do not fit in the socket as the OEM ones do. The "keeper" has to be bent back really...

My research for these has led to just the larger gauge male ones and nothing for the female ones. That is why I have migrated away from those where possible. You may want to also check Clips &...

Don't boss me. And I like where you went with this. :thumb: Still cheaper for both the connector and the Mopar coil than the one plug from that site.

Yeah it would be worth it to use something newer if the total cost to upgrade isn't bad and terminals and connectors are available.

63311

And yes Dan, it is different from the ones on their...

I'll post one this afternoon. It was an afterthought to get a new connector so I didn't bother when I was in the garage. The pic from the link though is basically it. The key would be the only...

Found two, but the price?! Sent an email assuming that this is for 50 or so.

https://connectorexperts.com/i-26423141-ce2440.html?ref=category:1261628
...

Well I'm just wondering where the people making the adapter are getting the older style connector. :-| I need one, one plug only. :) This now makes me want to find the source for these kits so I can...

Yes that one. Is that a factory connector? Why the adapter?

Anyone know where to get the 88 and up style coil connector? It's the coil style that mounts to where thermostat goes. Right now just need the plug since the retaining clip broke.

That stinks to hear you had issues, but glad they resolved it. I've always had good experiences with them, but this makes me a little concerned if I place another order. Thanks for the update!

Get the larger ones. The main issue you'll run into is getting a good crimp on a small wire, but much better than squeezing a large wire onto a smaller connector. You will more than likely need to...

Here are two.

http://www.clipsandfasteners.com/Universal_Locking_Type_Ring_Terminals_GM_Ford_Chry_p/a21401.htm

...

Do you think you could get a closer shot of the terminals?

Thanks. Cost is the big factor for me why I buy bulk online. If I can get 1-2 or 10 at the local store for about the same price shipped, that would be a good option.

What are they selling those for? Pack of 5 or individually?

The push clip is the best. Makes it super easy to remove the harness when necessary. I did check and this style is actually an old model that is sorta end of life, but I'm sure they will be...

I'm making a fuel injector harness and bought these for the connectors I have:

CONN-10657 GM Delphi / Packard - 280.1 Metri-Pack ( Metripack ) Female Terminal ( 20 - 16 gauge ) [Pull to seat]
...

To add to that, there is a post from a forum that states the following:




http://www.cj-8.com/forum/archive/index.php/t-36444.html

You should place orders for the samples and then just tell them they were lost in the mail until they start sending samples with tracking numbers. I figure you'll get three sets before that happens....