Search:

My 12ga Tefzel wire came in today. It will pass through the opening for the male terminal, so I think I'll just slide it through and use a Deutsch connector to mate the two halves together. If I need...

Thanks for the links. That's really helpful. I'm torn as to what I should do. I think drilling out one of the larger, unused terminal slots in the 50 way would easily allow for a 12ga tefzel wire to...

Mission creep time it may be. Are those autosport connectors? I have plenty of terminals, but would need those housings. I'm assuming they're some sort of bulk head connector? Did you sandwich two...

Has anyone drilled straight through the bulkhead connector just to pass a wire though? Seems like that would be a pain, but I don't need to remove the bulkhead very often, and if I use a deutsch...

I need the male connectors at the least. I need the thinner ones if possible. The Z1 wire is very, very sad.

Are the smaller bulkhead terminals available anywhere? The Z1 wire at the bulkhead on Joy's Daytona is not ideal to say the least. This whole harness actually makes me wonder how it was the nicest...

They are all the standard 1v narrow band sensors. It shouldn't matter which one you use, whether turbo, tbi, flex fuel, etc.

Throw me down for 300.

Depending on what the price is up to these days, I might be willing to pick up a large quantity. We might want to get while the getting is good.

Did we ever find a source for the SMEC/SBEC sixty way pins? With my LM problems as of late, I’m thinking of converting my wife’s SL to SBEC or SMEC.

I picked up the following from Rockauto. It was relatively cheap, and I've had good luck with the NGK products I've used over the years.
...

Thanks for the tips on the later coils everyone. I have a 98 Wrangler 4.0 coil coming with the matching pigtail from Rockauto. Not too terribly expensive, and it will solve the problem for a long...

Thanks for the link. I appreciate it.

Oh boy. I guess I'll try to clean it up and bend the tabs a little for more pressure on the pins. Worst case scenario, I think you just have to tap into the 8v feed for the HEP to run the later SDS...

Well, the Deutsch connector worked very well for my new injector harness.

I just reread the entire thread and did my best to see if someone posted something for the speed distance sensor. The...

I think you and I have done the same thing in that regard. It stinks having to mate them together through the connector like that so you can ensure they're actually mated. I don't need originality...

Thanks guys. While I would love to reuse this connector and retain the stock look, I might have to use a Deutsche connector on this car too. I'll do some more searching, but I can't even find the...

I would like to retain the stock injector wiring harness connector on my lancer if possible. All I can find is the male 14-16ga terminals. Does anyone have a link to the 18-20ga units? Also, if the...

I'm in for some.

It looks very similar to some later rad fan connectors too. It really would be nice to have this one figured out, as I would like to do this conversion.

Does anyone have a lead on these? I'm having a doozy of a time tracking down enough PDCs to get the 2-3 wires of the size I need out of each one. There are three terminals pictured above. The largest...

If you could find those I would be forever in your debt. I've tried a couple that looked like they would fit so far and they were no cigar. It would make installing a Neon PDC a breeze. As you stated...

I was wrong.

That is awesome.

This is truly good news. I'm also glad that someone else actually has luck doing this. I have yet to strike gold on anything and my pile of connectors I can't use for anything is getting pretty large.