Search:

Just thought I would see if there is any interest in these, I have a Shelby valve cover off an 87 Shelby Lancer and another off an '88 Shelby CSX-T

they are both in good condition and id like $200...

I was thinking it would be nice to have a small shot of nitrous (35-50) to spool up a big turbo and then once you are close to full boost have the meth injection kick in. Aside from the quicker spool...

doesnt nitrous cool down the air charge also?

I should have my car back together in a month or so and im starting to look at options for my transmission. I have an A520 with the 3.50FD and an A555 with the 3.85FD, and I thought I heard that you...

your burning the .bin file and not the .tbl file right?

Im going to pull the pan and change out the oil pump to see if it fixes the oil pressure problem, my dad seems to think the noise is coming from the valvetrain but I dunno. Also the noise doesnt come...

Cleaned out the pickup tube, didnt change the oil pump. Also it only makes the sound on rev-down or deceleration

I just put a rebuilt crank and bearings in my 87 SLancer because it decided to spin a bearing on me. After letting it idle for a bit I took it down to my parents house which is about a mile from...

just get an ostrich, uploading new cals in a split second while the engine is running FTW. I love mine like no other

I noticed your RPM log looks a little dirty. Are you logging from a wire off the coil? I had this issue when I logged from a wire off the coil "-" terminal, but then I tapped into the tachometer...

If hes running ladybug he should just be able to disable the routine that sets a code 53 correct?

Also, I thought Geoffs compiler did an automatic checksum update. Im running ladybug and ive never...

The tabs on the large connector are in different positions between the turbo smec and non-turbo smec. So you may have a chipped TBI smec which cannot be used in a turbo car because I believe the...

actually I think the HEP usually will not throw a code when it goes out, im willing to bet that is your problem. Beware of crappy auto parts store HEPs though, its not uncommon to get a brand new one...

It really wouldnt be hard to set up a three stage boost control with the stock computer. But it would be kinda pointless, I have mine setup to run 15psi or 100% duty cycle to get the boost as low as...

sent you a pm :)

the belt is jumping on the gear, I dont have the timing belt cover on and I think that is causing the problem. Im gonna head to a junkyard and get another cover but I thought I would share this issue...

Ive had to time my engine about 3 times now and its really starting to suck. Ice keeps forming in the grooves on the top of my distributor/oil pump gear and then the timing belt will skip a couple...

If you end up grabbing the grill sometime I really need one ;)

my dad might be interested, ill show it to him and get back with you :thumb:

lol dude thats weird I see that too :hail:

didnt think about that, so what is actually doing the whining? the tensioner?

I lined up the flywheel mark with the 0 degree mark in the transmission window, then took off the distributor and set...

Ive been running an ostrich for about 2 years and its worth every penny, I love that thing! Although a week ago mine got a little wet and decided to crap out on me :mecry:

so for everybody that...

ok I have a weird issue here. The other day I woke up and tried to start my car and of course it didnt feel like running, go figure. So after trying a bunch of different things and after a lot of...

I had the same happen to me also, bad coil...

Maybe your tach is still jumping because the capacitor thing next the coil is blown? I think that is used to filter out noise.

Ok just as another FYI, ive heard that when swapping an SRT-4 engine using the SRT intake manifold the throttle body will interfere with the transmission. This may be with autos only though.

I can...