If you're interested I can try and get one next weekend with logworks on my CSX. I'm not sure how easy it'll be to export whatever format logworks uses into something that you can parse...
Type: Posts; User: risen; Keyword(s):
If you're interested I can try and get one next weekend with logworks on my CSX. I'm not sure how easy it'll be to export whatever format logworks uses into something that you can parse...
After a 2 year stint in storage my csx is back on the road and I'm eager to start messing with it again. So, I'm wondering if the S4 cal over in the staged cals thread is based upon this codebase? ...
You're very close to correct there. 0xc000 > 0x8000 so if your file is only 0x8000 long, emutility can't do what you're asking it. Basically, you don't want any file offset, that field should be...
It's in this thread (which zin already found): http://www.turbo-mopar.com/forums/showthread.php?42191-Logworks-plugin-for-SMEC-SBEC-LM&highlight= .
Frank: the source code is in the .zip file in...
Depends, I think it's usable as-is but due to the way I have the screen laid out etc, some people with netbooks or who have their resolution set really low (< 1024x768) have a hard time with the...
I built one for my brother that's going in a 67 dart, though it's laid out in a circle with 40 green/red smt leds. It fully stand alone gauge based upon some TI led drivers and a atmel 8 bit mcu. ...
Glad no one spent too much time on that :). You should be able to have as many channels as you'd like once you get start using the regular Innovate device and normal .dll. Also, if you're using one...
Are you using the regular install with a lm-1/lc-1 or other innovate device? Or are you using the stim .dll to get around having to use an innovate device? I only had a problem with a limited...
Sweet, progress :) My whole summer is screwed this thanks to my 2 courses and the statistics course my wife (Ahem, I) has. But most of that stuff is tunable to a large degree through the serial...
I can confirm your suspicions, though with a SMEC. When I bench tested the ostrich with my bench smec, I found that it would, in fact, have enough juice to run the smec MCU even if the smec was off....
That's why you don't have to specify it. Emutility automatically calculates it and starts writing at the correct emulation offset. I spent a few weeks writing some software to load bins on Ostrich...
Well, since it's working OK none of what follows really matters, but it's probably good to discuss it here for people who have troubles in the future.
IDK if I buy that first couple of lines...
I'd suggest you get someone with a eeprom reader and have them read the ostrich like you would a chip. That way you can read the bin from the ostrich through the eeprom reader via the ribbon cable...
Once the logworks plugin is done the winlog is up next. Since I'm making the code to handle ECU comms more modular for logworks the winlog should come pretty shortly after. Though, you're probably...
Nothing in a workable form yet. I've got such a backlog after this semester and moving for the 2nd time in 2 years it's a little crazy. Basically the code to handle encapsulation of each variable...
The point of using logworks in the 1st place is that it will read the output of your wideband digitally. If you're using an innovate device and datalogging from the ECU there's no point to hooking...
Thats my current understanding, yes.
My brother helped someone convert a 05 gt stang to have a blower and I was there helping him troubleshoot a lack of pressure at the rail and it turned out to be a dead module shipped from the company...
Sorry it took me so long to get to this. Though, my answer isn't great since all I have to back it up are 2nd and 3rd hand references. I think the difference between the 2 sensors has to do with...
I'm not 100% sure how the LM works, but the AIS motor is typically the idle control of last resort. Normally the timing will be adjusted (this is what spark scatter mostly refers to) to adjust the...
The clock of the mcu is set by the crystal on board. I believe the mcu can take a faster clock than what we currently run but then any constant that compares with the timer/counter needs to be...
From what I understand the 6811 code is directly compatible with the '12 . 6803 isn't compatible with anything, as far as I know.
It's not going to be a direct drop-in, that's for sure. The voltage pins are in different spots.
I do have one of these:...
No, not currently. Bucar, Frank, and I are working on an external black box that does exactly this. It uses a DSP chip to filter for a certain set of frequencies, only monitors for knock in a set...
That's more what I was thinking about, putting the checks into the main loop to avoid the function call overhead altogether.
I guess I'm going to have to sit down tomorrow and look at the...