New price. $300 for everything that is left
Type: Posts; User: anarchyjet; Keyword(s):
New price. $300 for everything that is left
Bump... engine and electronics still available.
Got a look at the tag on the trans. It's a 93 build and 3.77
Date: 07th June 2018
Username: anarchyjet
Full Name: Tim
City, State, Zip: Brookfield, WI 53005
Contact: Forum message or text 414-3zero8-43o5
Price: $300 for everything below that isn't...
2 or 4 door? I need a passenger door for a 2 door. It's for the race car, just need something that isn't all smashed up or completely rusted out. I'm local enough to pick up
Sent from my XT1585...
No the bolts were not replaced they just ground the caps and resized the big end
Doing a stock rebuild with LW rods and cast pistons. Rods were resized at the machine shop and new pistons pressed on. Went to assemble the short block and one rod bolt just didn't feel right on...
Drilled mine at .040" because that was the smallest drill I had. Works great even at low boost settings. I've had it set to 4psi and never had a problem.
You don't need an Ishaft with megasquirt running COP/DIS and an external pump dry sump oil system. I want to see the custom seal retainers and oil pan. Why cant the whole motor be installed 180 to...
yep all the bearing journals are equally spaced and the crank will go into the block 180 degrees. My I ask why you want to do this?
Do you have a pic? A lot of Chrysler relays use Packard 56 series terminals and connectors.
Machine shop says my crank needs to be cut and it will cost a $150 plus bearings. Looking at reman crank kits on advanced autoparts shows 2 different part numbers for an 2.2 86 turbo Z. One is $120...
I hear ya! I was just sick of doing all the work, paying all the bills, and hunting down drivers to squeeze money out of them. So when the opportunity came to have 3 other guys help out I jumped. ...
http://www.turbo-mopar.com/forums/showthread.php?64717-When-11-quot-isn-t-big-enough&highlight=when+11%26quot%3B+isn%27t+big+enough.
Thread for my big brake fronts.
Wish I was racing the Shadow...
After 4 races on a Lemons Shadow the rear drums have worked great. I resurfaced the drums and put "gold" level parts store semi-metallic shoes on. These cars don't have much weight over the rear...
http://www.therustyhub.com/2013/01/crapcanalysis-part-2-unlocking-lemons.html
Much more recent article with what type of car does well in LeMons. Basically if your car can last the whole race and...
As someone who races a 2.2 in LeMons my best advice is...Don't Do It. These motors are not very reliable for endurance racing. If you are hell bent on running one staying NA is the best thing, but...
I've done it and my advice is...sell the car and buy a factory turbo car. They are not that rare to bother with a swap.
I am in need of an oil cooler. Did some searching and seems a sandwich adapter and cooler mounted in front of the rad. is best. The other option is running oil through the radiator via trans...
http://www.harborfreight.com/8-piece-silver-and-deming-drill-bit-set-527.html
http://www.harborfreight.com/6-piece-pipe-tap-die-set-91395.html
Use the 11/16" drill and 1/2" tap. Do a 1/4" pilot...
Nope...the larger one provides more force. F=PA holding pressure constant means increased area equals increased force. Incase anyone forgot A=pi *r^2
Your brakes will be fine if you run good pads and fluid. I run wagner severe duty and they work great at a good price. Don't focus on the DOT number of the brake fluid. To meet dot 4, or 5.1 they...
I like Federal 595's from onlinetires.com I run 205/45-17 on my LeMons car and they work great and are dirt cheap.
Like the title says. I called my local stealership and got qouted $18 each. Counter guy said there was only 1 in all of wisconsin and it would take a week to get 8. The 2 times I've had him order...
Any chance you have a power module to go with the LM?