So I have the gauges all figured out in MPScan. Now how does the logging work with MPTune? I tried to export a log from MPScan then import it into MPTune under Settings>Wideband>Setup Log Data and...
Type: Posts; User: streetpirate; Keyword(s):
So I have the gauges all figured out in MPScan. Now how does the logging work with MPTune? I tried to export a log from MPScan then import it into MPTune under Settings>Wideband>Setup Log Data and...
currently working on getting accurate data going into mpscan.
Ive set the lc-1 output to the ecu to wideband
turned on the wb2nb and set the widebandtoafrtransferfunction to the correct voltage...
it's a 2.5
scaled the stage 3 cal for 55pph and i'm getting 10.3:1 at 17psi wot.
also ordered a db9 to usb converter so i can set the channel on the lc-1 going to the ecu to a wideband for...
Rob, I have been running the stg4 mainly because it was already set up for +40's, but I did try the stage 3 cal for a day scaled for +40's (only change) and I was seeing a similar rich condition.
...
I have not changed the fuel tables at all yet. They are injector pw on the Y and map on the X. I'm just concerned that my actual afr is so much different than the calculated afr in the fuel tables. ...
EDIT: Brain fart. If I can get my laptop to talk nice to the LC-1 I can just program both the analog outputs to be wideband and turn on wb2nb in the cal. That takes care of the logging issues...
So now that I have MPScan working what is the best way to log afr data for PerfTbl tuning?
It seems the best way would be through the ecu so the data points all line up between map, rpm, and afr....
Figured it out
in ft_prog under hardware specific there is an option that came pre-ckecked to force it to only load the D2XX drivers and disallow the virtual com port drivers to load. unchecked...
Ive restarted the computer, plugged in and unplugged the cable, tried plugging in the cable with mpscan open as well as opening it after the cable is pluged in and recognized by windows.
Is there...
Ok first things first - get MPScan to recognize the sci cable
I'm running Win 8.1 x64, plugged in the cable and it auto-detected and installed the device drivers. I updated to the newest drivers...
So I'm running a turbonator cal and have ordered a sci cable from Rob (should be arriving in the mail today)
I've read through the MPScan thread, and have some questions.
On the wiki page...