Changed the fuel pump, sender unit and fuel filter. Installed Poly Bushing for the alternator and replaced The AC tensioner pulley.
Sent from my LM-V450 using Tapatalk
Type: Posts; User: 82 Rampage; Keyword(s):
Changed the fuel pump, sender unit and fuel filter. Installed Poly Bushing for the alternator and replaced The AC tensioner pulley.
Sent from my LM-V450 using Tapatalk
That would be great.
Sent from my LM-V450 using Tapatalk
Looking for some trim pieces for my 1990 Daytona. Needing the passangers side A pillar plastic cover, the strip to go between the A pillars at the top of the windshield inside and both sides of the...
Fixed a few things on it. Passangers window started acting up when putting it up, took door panel off and somehow the bolt was missing out of the top of the guide rod. while I had it apart, put some...
Actually, got it running a couple days later, turned out to be a bad connection on the SMEC. it's doing great now. Which is great, because the SMEC I ordered wouldn't even start the car, had to...
Waiting on a new SBEC for it, getting a code 27 Injector driver 2 open or shorted. Seems to do it after driving for about 30 min. Let it sit and cool off, restart it and no Check Engine light and...
Got one, Thanks
Just Got this thing back on the road after sitting in the pasture for about 3 years now. It was my daughters for abou 3 years before that.Lots to fix, but I think I've got it somewhat reliable to...
Looking for an instument cluster for a 1990 Daytona. Would prefer a working one, but can use a partial or non working cluster to build a custom one from.
Trying to find a blower motor wheel for a 1990 Daytona, or a good blower motor w/wheel to fit it. Anybody have one they will sell?
That's what I thought, but when I got in the door, the prior owner tried to do something to the regulator and there are parts missing, otherwise I would just fix it. Besides that, I need a whole unit...
Looking for a left front window motor/reg assembly for a 1985 Lancer/Lebaron GTS.
Looks like this.https://uploads.tapatalk-cdn.com/20170727/6f94ce161160fd9d96f1af15a49e11f2.jpg
Sent from my SM-G920P using Tapatalk
Not sure if its an H body, possibly. May get a good deal on one just needs a hood.
Sent from my SM-G920P using Tapatalk
Looking for a hood to fit an '86 Lebaron GTS.
Sent from my SM-G920P using Tapatalk
Anyone know the part numbers for both shifter cables on a 1990 Daytona es 2.5 turbo and where they can be bought at a local parts store? And how hard are the to install, I put poly bushings in last...
Almost all back together, just have to get it off the stands, torque the lug nuts and get an alignment.
Sent from my SM-G920P using Tapatalk
Got the control arms off replacing ball joints, bushings with poly bushings and wheel bearings.
https://uploads.tapatalk-cdn.com/20170717/c8eb9e35d6fb5a6a68455fb553d2a653.jpg...
Just read your post, been busy. It's an '87 GLHS #582. I'm just not putting all the decals back on, and going to wet sand and buff before I put any of them on. No, I didn't drive it from TN, we...
If you need any help, let me know, I will be out of town tomorrow, but after that till time to leave I can help if needed.
Sent from my SM-G920P using Tapatalk
1st show with the car in 2 years. Bandimere, CO
https://uploads.tapatalk-cdn.com/20170605/1eb83b4d92d1779d06abc998e30e30cf.jpg
Sent from my SM-G920P using Tapatalk
Got it all back together. Drove it today for the 1st time in almost 2...
Progress pictures....
Got it back from paint shop today....