Search:

Ah Gotcha

What do you mean by "diode relay"?

LOL,
Brian I was cleaning my heater cores and pumping the 10% mix with a old fuel pump. The 12V was inside the pump thus the electrolysis

Sulfamic acid

Just purchased 1000. I will be at SDAC, if you want 'em

Have you check with Ed?

Thanks Guys!

Just a quick question, is the cable 100% FTDI. As I understand MPScan requires a 100% real FTDI chip. I have also received odd behavior with a clone FTDI but I have not retested with a real FTDI. It...

OK Thanks
Going to pickup a few while I am in the USA to save on crazy Shipping rates to the Great White North

I am in need of buying a new set of 11" rotors for my 91+ K frame/brakes with 60mm calipers.
I used EBC drilled and slotted for approx 5 years on my DD but now one is warped after 30-40K.
So I...

Anyone interested in Pins?<br>looking to order 1000 to get a good price.

Congrats!

Oh ya

OK, I just used a telescopic magnet, if needed for the keepers etc

Last I checked approx 22 cents each

This is what I use
https://www.amazon.ca/Sealey-Valve-Spring-Compressor-Lever/dp/B000R9ZITC
Works great just need to adjust the handle differently than the picture

Yes but needed 1000 pin order. Perhaps we could give it another try

- - - Updated - - -



Bill, what were these for??

Holy crap 160A???

Info from Bill
Chrysler PN 42909707
The Ford PN is E7EB-14421-EA, AUVECO PN is 16342 and is sold through Clipsandfasteners.com Inc. A box of 25 is $10.91 US, size claimed is 18-20 ga, but I have...

Or any other ECU you want tested. I can test caps quickly

Brian, bring your Power board to SDAC and I will check the caps for you. No charge. If the cap are bad, I will have spare caps with me.

Let me know, if you need info. Check the two caps on the Power board. I do find the 8V cap needs replacing

I found a few super low drop out (LDO) for SBEC 5V power supply linear regulators. Once I verify functionality, I will share part numbers. Next, I need to figure out the 5V regulator used in the...

Cordes,
So would the 11718 fit my 87 P bodies?

Sounds great Randy that a new ASD relay fixed the issue