P4452006AB Headgasket any good?
Has anyone had any luck with the new mp headgaskets while making 260-270hp and 22psi boost (stock turbo)?
I had a failpro P9296Pt and it blew between 1 and 2 cylinders likely due to them not blocking the steam holes off and blocking the small holes between the cylinders off which caused extra heat there and detonation.
https://i.postimg.cc/cKtx5VqB/Untitled.jpg
Re: P4452006AB Headgasket any good?
Made plenty of hp with Felpro and that head gasket shown above does not appear to be TURBO version and NO head-gasket survives detonation. Once wasted a multi layer, and NEEDED to get to work, so I would turn car off once I got speed and coasted....managed this multiple times which in turn nearly wiped my block out. GLHS beat down new Camaro even with detonation=expensive pride!
Re: P4452006AB Headgasket any good?
Quote:
Originally Posted by
trannybuster
Made plenty of hp with Felpro and that head gasket shown above does not appear to be TURBO version and NO head-gasket survives detonation. Once wasted a multi layer, and NEEDED to get to work, so I would turn car off once I got speed and coasted....managed this multiple times which in turn nearly wiped my block out. GLHS beat down new Camaro even with detonation=expensive pride!
Did a better zoom at the pic, def. a turbo gasket for sure...