Re: Turbonator GLHS codebase
Just FYI - This will still need some type of .bin splitter to break the assembled .bin into the upper and lower chip .bin files. I think wowzer is working on adding that to function to MP Tune.
Re: Turbonator GLHS codebase
Pretty sweet guys, :hail:
Re: Turbonator GLHS codebase
Sounds like this would require a "double" socketed LM?
Mike
Re: Turbonator GLHS codebase
done. when you compile a glhs bin it will now create a 24k bin AS WELL AS an 8k lower bin and an 8k upper bin. there is a setting under program settings to turn this on or off. the default is on.
Re: Turbonator GLHS codebase
I'd be curious if anyone could build a stock version of this, plug it in, and make sure it works; since I have no way to test it other than to look over the code...
Re: Turbonator GLHS codebase
Just FYI, MP Tune isn't displaying the 3 main fuel tables correctly for the GLHS. I think it will scale for injectors OK, but do not use the AFR setup. It will give you half (I think) the fuel required. wowzer is working on an update so that the GLHS fuel tables get treated like the 87 T2 LM.
Re: Turbonator GLHS codebase
OK, the last update to MP Tune should have fixed the fuel table issue.
Anyone try this yet? Dyin for some feedback (and maybe something to do tomorrow)...
Re: Turbonator GLHS codebase
The fuel injector scaling for 3 constants was wrong. wowzer updated MP Tune to correct the scaling. But, if you have a current cal and want to fix the tables, they are:
PWMIN_NoCellUpdateBelow_PWMIN_Pulsewidth
FUELTR_FuelMonitorConversionFactor
POSFUL_AisEnrichmentFuelPulse (only in the SMEC and SBEC code)
PWMIN probably had minimal effect; FUELTR obviously affected the navigator fuel economy figures; and the POSFUL would have an effect on idle fueling and will be worse for bigger injectors. POSFUL is only in the SMEC and SBEC codebases.
If everything is working fine in your cal, I wouldn't worry about it. But, if you have a rich idle issue or want to fix the navigator FE display, you'll need to manually scale these values. Scale them by this formula:
scaling factor = current value * (34.9/injflowrate)^2
MP Tune scaling factors for the common injectors (scale each of the 3 tables above by this factor using 'right click, scale table' from the pop-up menu):
+20's --> 69%
+40's --> 45%
72's --> 23%
Re: Turbonator GLHS codebase
Anyone try this yet? Once we've confirmed there are no bugs in it, I'll make a set of stage cals from it...
Re: Turbonator GLHS codebase
For somebody to try this, they will need to have a GLHS LM w/ both chips socketed, correct? Most just have the upper socketed, if that.
Re: Turbonator GLHS codebase
Re: Turbonator GLHS codebase
I'm interested in trying this, but the Omni is off-site right now due to other projects, as well as having to socket the "other" chip... Which I've never done, so I'm a little hesitant...
Mike
Re: Turbonator GLHS codebase
I need to send you my GLHS LM to socket the lower chip so I can try this.
Re: Turbonator GLHS codebase
Quote:
Originally Posted by
Force Fed Mopar
I need to send you my GLHS LM to socket the lower chip so I can try this.
Ok, send it on. LM's are easy to socket...
Re: Turbonator GLHS codebase
Aight, I'll send it this week.
Re: Turbonator GLHS codebase
Quote:
Originally Posted by
Force Fed Mopar
Aight, I'll send it this week.
Still want to try this? I forgot about you sending your LM to me to socket...
Re: Turbonator GLHS codebase
Quote:
Originally Posted by
ShelGame
Still want to try this? I forgot about you sending your LM to me to socket...
So did I, it's been riding around in my trunk for a while but somehow never makes it into the mail lol. I'll box it and send it to you tomorrow, just send it to the address on the BoostButton website? Also, I may send you one of my '85-86 T1 computers to double socket as well, as I'm sure any future tuning on them will require that also?