Many parts, SDAC delivery available.

June 18, 2015
daveskrab
Dave Skrab
Gilbertsville, PA 19525
PM, post, or email dskrab@hotmail.com
Prices listed with each item

$300 shipped - Refurbished 782 swirl head, essentially ready to bolt on, has unknown roller cam, lifters, and followers installed. Couple of thread repairs were made to the manifold mounting area. Will include a cleaned up and painted 1piece gasket valve cover.
http://images.tapatalk-cdn.com/15/06...2aaad7dffb.jpghttp://images.tapatalk-cdn.com/15/06...694dce63e9.jpg
$200 shipped - ported G head, needs valve job, was removed for smoking issue. No cam, has studs installed for valve cover mounting.
http://images.tapatalk-cdn.com/15/06...29e65a7c75.jpg
$50 shipped - bare 1 piece Turbo I intake manifold, has been bead blasted.
http://images.tapatalk-cdn.com/15/06...5985ace28e.jpg
$300 add shipping - Centurion II's, 2 have clear coat stripped and have been lightly polished, the other two still need attention.
http://images.tapatalk-cdn.com/15/06...833cee3796.jpg
$300 shipped - new 2.2 Wiseco forged pistons. This is a very old set found in a warehouse. No wristpins, no rings, no clips. 3.484" bore. Comp HT 1.590.
http://images.tapatalk-cdn.com/15/06...3772aedae7.jpghttp://images.tapatalk-cdn.com/15/06...f80508d7dd.jpghttp://images.tapatalk-cdn.com/15/06...4b664d05c7.jpg
$ 20 each add shipping - (4) 15x6 crab wheels, one painted, one stripped, one stock. Found a 4th one.
http://images.tapatalk-cdn.com/15/06...49b92cfbf8.jpg
SOLD - 1989 T2 turbo, near zero miles, sitting for 20 or more years, found in warehouse. This unit has the 2.5" swing valve, and the large wastegate can. May need to be rebuilt, some oil residue on turbine wheel. Spins free.
http://images.tapatalk-cdn.com/15/06...05edb6734c.jpghttp://images.tapatalk-cdn.com/15/06...e944acb45d.jpg
$ 50 add shipping - slider cam, possibly a regrind, has purple paint on it. Found in warehouse. Excellent condition. No specs available.
http://images.tapatalk-cdn.com/15/06...4781c78fc1.jpg
$ 40 add shipping - 1988 T1 mitsubishi turbo, needs rebuilt. Came from an engine with a knock.
http://images.tapatalk-cdn.com/15/06...1d0db76608.jpg
$25 each, add shipping - Turbo 2 exhaust manifolds. One painted, one not, one is lightly ported.
http://images.tapatalk-cdn.com/15/06...6ac0e47390.jpg
$ 20 each add shipping - fuel rails for 1piece intake. One has a crushed regulator.
http://images.tapatalk-cdn.com/15/06...7c0d3da241.jpg
$ 20 each add shipping - 5 airboxes, two Turbo2, two Turbo1, one is modified. Have airbox inlet hoses also, mix n match with purchase of an airbox.
http://images.tapatalk-cdn.com/15/06...3957d19f62.jpg
$20 each add shipping -multi piece valve covers only remain. 4 valve covers, two with 1piece gasket(SOLD), 2 with multi piece gasket.
http://images.tapatalk-cdn.com/15/06...6e9df970d2.jpg
$400 pickup only - 1993 3.0 V6 engine, less than 10,000 miles since rebuild, ran very well when car was totalled.
http://images.tapatalk-cdn.com/15/06...b53dee79ea.jpghttp://images.tapatalk-cdn.com/15/06...d732afcad7.jpg
$300 pickup only - 1993 3spd auto trans, less than 10,000miles since rebuild. New converter when overhauled. Has .91 transfer gears installed. Operation was excellent at the time the car was totalled. http://images.tapatalk-cdn.com/15/06...8e57dc54a4.jpg
Thanks for looking!

Bump for the weekend.

1 week away from SDAC Bump!

Edited some items sold.

Can you measure the pistons for pin and ring sizes?

Are you still able to deliver these to SDAC?

Yes, and yes.
Will need to measure the pistons on thursday. Will let you know.

Quote:

---

Originally Posted by contraption22

Are you still able to deliver these to SDAC?

---

Mike, I will meet you at the host hotel saturday afternoon for you to peruse the selection of parts... deal? :rolleyes:

Quote:

---

Originally Posted by moparloper

Can you measure the pistons for pin and ring sizes?

---

Sorry for the delay, the pin measures for a stock .901" pin.
Top ring is 1.5mm
2nd ring is 1.5mm also
Oil control measures 4mm.
Hope this helps!