Re: 85 L-body Connector ID
5 a. is the horn if I'm not mistaken, while B is the diagnostic connector. The fuse looking things are for the solenoids.
4 I think is AC stuff.
I think 3 a is where the TPS and AIS plug into. I'm not positive, but if that two way connector is black and black with blue tracer, that's for the fog lights.
I also think you're on the right track in the first picture, but I would have to look at my diagrams to be sure. I might scan some stuff for you in the next day or so.
Re: 85 L-body Connector ID
Quote:
Originally Posted by
cordes
5 a. is the horn if I'm not mistaken, while B is the diagnostic connector. The fuse looking things are for the solenoids.
4 I think is AC stuff.
I think 3 a is where the TPS and AIS plug into. I'm not positive, but if that two way connector is black and black with blue tracer, that's for the fog lights.
I also think you're on the right track in the first picture, but I would have to look at my diagrams to be sure. I might scan some stuff for you in the next day or so.
That makes sense...and okay...the vacuum solenoids. Looks like I need those as well. Lol 4 may be A/C stuff, I found something similar on another diagram. What does the alternator wiring look like because I don't see that either.
That is what I gather for 3A. I believe that may be for the foglights then, though it doesn't seem like they'd be long enough. It has been so long I honestly forget.
Any further assistance you can offer I would be greatly appreciative of. This, for the most part, is all that is standing in the way of this car starting for the first time in 10 years. Haha.
I do have a few diagrams but not every plug is highlighted, just the ones I mentioned. These are the ones I have.
https://i.imgur.com/DInDbZz.jpg
https://i.imgur.com/thiBlSR.jpg
https://i.imgur.com/EVGb9AG.jpg
https://i.imgur.com/pRq1ZtT.jpg
https://i.imgur.com/ychcg98.jpg
Re: 85 L-body Connector ID
AIS/TPS on my 85 Charger are weathertite plugs with green rubber pleated seals. I don't have spares, sorry. I have spare solenoids. But if you are not keeping emissions stuff you won't need the EGR and Purge solenoids. If you are going to have the ECM control boost you will need the wastegate solenoid and the map solenoid. On my car they are from left to right, the egr being closest to the fender well on the passenger side.
Re: 85 L-body Connector ID
If you can't sort them out I still have my 1985 FSM set and can look in them.
Re: 85 L-body Connector ID
Quote:
Originally Posted by
jeff1234
AIS/TPS on my 85 Charger are weathertite plugs with green rubber pleated seals. I don't have spares, sorry. I have spare solenoids. But if you are not keeping emissions stuff you won't need the EGR and Purge solenoids. If you are going to have the ECM control boost you will need the wastegate solenoid and the map solenoid. On my car they are from left to right, the egr being closest to the fender well on the passenger side.
I'm definitely not going to keep the emissions stuff, but the other two will be needed. It seems for the AIS/TPS, there is a separate mini harness...its simple enough I could always make one, I suppose. Lol
Quote:
Originally Posted by
85lebaront2
If you can't sort them out I still have my 1985 FSM set and can look in them.
I think I may have it figured out...or...more so I realized I'm missing some pieces that plug into the harness. But thank you.
Re: 85 L-body Connector ID
what do you think eliminating the egr and purge solenoids will actually accomplish on a log motor ?
if you put that modding effort into the TII conversion the egr is deleted by default
purge and charcoal canister are your friends
they simply keep your hard earned cash from evaporating into thin air
deleting charcoal canisters is something rednecks do in the '70's
Re: 85 L-body Connector ID
Quote:
Originally Posted by
Dr. Johny Dodge
what do you think eliminating the egr and purge solenoids will actually accomplish on a log motor ?
if you put that modding effort into the TII conversion the egr is deleted by default
purge and charcoal canister are your friends
they simply keep your hard earned cash from evaporating into thin air
deleting charcoal canisters is something rednecks do in the '70's
I'm installing a T2 GLHS engine.
The charcoal canister contents turned to mush and gummed up the fuel system and carburetor (since it sat from 1992-2008) which is a good part of the reason the car is getting swapped to FI/turbo since I got tired of messing with it...so the charcoal canister went in the dumpster almost 10 years ago along with the original carburetor.
Re: 85 L-body Connector ID
I looked at my Charger last night, and you are correct. The throttle body harness is a mini that plugs into the main one. Let me know if you want further information.
Re: 85 L-body Connector ID
Quote:
Originally Posted by
strang3majik
I'm definitely not going to keep the emissions stuff, but the other two will be needed. It seems for the AIS/TPS, there is a separate mini harness...its simple enough I could always make one, I suppose. Lol
I think I may have it figured out...or...more so I realized I'm missing some pieces that plug into the harness. But thank you.
I have a piece I cut off of a 1991 Shadow 2.5L T1 the 3 and 4 pin plugs for the throttle body (TPS & AIS), if you have a good picture of the mating plug/socket I have a load of spare bits including some new repair parts.