Replacing lock cylinders

I'm wanting to replace all the locks on a 1986 GLH Turbo. The original (only) key still works in the doors but it is extremely worn out. You also no longer need a key at all to start and drive the car. The trunk key is long gone...

I've found the lock cylinders on Rock Auto, but I want the keys for the front doors and ignition lock cylinder to match (like stock). Is it possible to buy a matched set or is it possible to rekey the cylinders so that they do match? What about the glove box....should it use the same key as the trunk?

Would this work?

http://www.ebay.com/itm/Ignition-Doo...b07ca0&vxp=mtr

Any competent lock smith can make all the cylinders match a specific key. Last time I had it done was about $10 per cylinder

A locksmith can work wonders. For under 30 dollars, I had a locksmith take my broken ignition key cylinder in my Daytona, make a factory key based on it, then he took my lock cylinder that I bought aftermarket for cheap, and keyed it to the factory key. He did this in under an hour.

To answer your question though, you can probably buy any aftermarket key cylinder for your trunk, remove one of the door or ignition cylinders, and go to a locksmith and ask them to make a factory key for you and re-key your aftermarket trunk cylinder cheaper than it is to replace all cylinders.

Yes a locksmith can work wonders and replace all the locks at pretty affordable cost. So search for nearby locksmith and get the locks done by them.

if I remember correctly the ignition key works the hatch lock
the "trunk" key only fits the glovebox

the bezzel or face of the glovebox lock comes off so you can remove the lock from the glovebox door

there's a method to remove it with a paperclip or other piece of stiff wire in the fsm's

1986 part book:

04419007 1 SERVICE and REPAIR PACKAGE, Lock Cylinder
LOCK CYLINDER and KEY PACKAGES
04378167 1 L,K,E,S,M Ignition Lock, Bright
04378166 1 H,G Ignition Lock, Black
04378168 1 K,E,H,S,M Ignition Lock, Bright, w/Tilt Steering
04378169 1 G,H Ignition Lock, Black, w/Tilt Steering
04378171 1 L,K,E,S,M Door Lock, Bright
04378172 1 K,E,M Door Lock, Bright, w/Illuminated Entry
04378173 1 K27,G,H Door Lock, Black
04378174 1 G Door Lock, Black, w/Illuminated Entry
04378175 1 L24,K45,S Lifgate, Bright
04378176 1 G Lifgate, Black
04378177 1 S Lifgate, Black
04378182 1 H,S Glove Box and Console
04246645 1 L,G Glove Box, Black
04054081 1 K,E,M Glove Box
04246855 1 S Console and Pass. Seat Comp.
04246892 1 H Liftgate and Glove Box
PART
NUMBER QTY BODY MODEL DESCRIPTION
04246646 1 L 44 Liftgate and Glove Box
04246793 1 K,E
(Exc.45)
Deck Lid and Glove Box
04267850 1 M Deck Lid and Glove Box
04246926 1 S Cargo Door, Liftgate and Pass. Seat Comp.
04419033 1 Deck Lid Cylinder Key and Shaft Pkg.
1 E,NEW
YORKER
Instrument Panel Console
04311754 Up to 1-24-86
04372710 After 1-24-86
04370068 1 M (EXC. F) Ignition, Door, Glovebox and Deck Lid, w/Single Key, w/Tilt
04370069 1 M (Exc. F) Ignition, Door, Glovebox and Deck Lid, w/Universal Key, w/Tilt
04378184 1 CYLINDER, Ignition, Bright
04378185 1 Black
1 04246904 1 KEY, Ignition and Door (Capsulated)
03454327 1 Ignition and Door (Not Capsulated)
03454493 2 K21,41,45,M KEY, Door, Ignition w/Single and Universal Key
2 02999041 1 KEY, Deck Lid, Liftgate and Glove Box
04318784 1 TP KEY, Instrument Panel Console Glove Box
3 04378035 1 G FUEL FILLER LATCH PACKAGE, Repair
04378034 1 E
4 03695321 1 K,E,M GASKET, Deck Lid Lock Cylinder
03695321 1 Liftgate Lock Cylinder
5 02583860 2 GASKET, Door Lock Cylinder
6 02583377 2 L,K,E,M RETAINER, Door Lock Cylinder
04184686 1 G,H w/Illuminated Entry, Right
04184687 1 G,H w/Illuminated Entry, Left
04184684 1 G,H,S w/o Illuminated Entry, Right
04184685 1 G,H,S w/o Illuminated Entry, Left
7 04054202 1 NUT, Deck Lid and Liftgate Lock Cylinder Retainer
8 02765069 2 RETAINER, Door Lock Cylinder Tumbler
9 06026125 2 RETAINER, Lock Cylinder Lever and Reverse Lever Pivot
06026125 1 S Sliding Door Outside Handle Key Lever
06026125 1 Front Door Lock Cylinder Lever
04280659 1 S Sliding Door Outside Handle Cylinder
06032107 1 L24,K45, CLIP, Liftgate Lock Cylinder Lever Retainer
10 02802124 2 LEVER, Door Lock Cylinder
11 02765073 AR SPRING, Door, Deck Lid and Liftgate Lock Cylinder Tumbler
12 03861746 1 M SPRING, Deck Lid Lock Cylinder Shaft Retaining
13 04276999 1 K,E,M GASKET, Deck Lid Lock Cylinder Medallion
14 09431636 1 PIN, Ignition and Steering Column Lock Cylinder Buzzer Switch Actuating
Arm
09431637 1 Ignition and Steering Column Lock Cylinder toDriv er
15 04246496 1 K 45 LEVER, Liftgate Lck Cylinder
04378015 1 G Liftgate Lock Cylinder
04246815 1 S K Liftgate Lock Cylinder
04246790 1 H Liftgate Lock Cylinder
16 03454517 1 RETAINER, Ignition and Steering Column Lock Cylinder Actuating Arm Spring
17 04019548 1 K,E,M PLUNGER, Lock Cylinder Retainer, w/o Tilt Steering
18 03760130 1 L24,K CLIP, Door Lock Cylinder Retainer, Right
03760131 1 L24,K CLIP, Door Lock Cylinder Retainer, Left

CARAVELLE,600,NEW YORKER LANCER,LEBARON GTS,LEBARON,CHRYSLER GTS OMNI,CHARGER,RAMPAGE,HORIZON,TURISMO
CARAVAN,GRAND CARAVAN FWD/AWD,CARAVAN C/V,VOYAGER,GRAND VOYAGER FWD/AWD,TOWN & COUNTRY FWD/AWD (861)
SERIES LINE BODY ENGINE TRANSMISSION
NA = Not
Available
J = E - Body Caravelle
E = E - Body 600
T = E - Body New
Yorker
V = (24) G - Body
Daytona
C = (24) G - Body -
Laser
C = (44) H - Body -
LeBaron GTS
D = (44) H - Body -
Lancer
P = K - Body - Reliant
D = K - Body - Aries
V = K - Body - 600
C = K - Body -
LeBaron/Town &
Country/Limo
M = L - Body -
Horizon/Turismo
Z = L - Body -
Omni/Charger
B = M - Body - Gran
Fury
F = M - Body - Fifth
Ave/Newport
G = M - Body -
Diplomat
P = P - Body -
Sundance
D = P - Body - Shadow
H = S - Body - Voyager
K = S - Body - Ram
Van/Caravan
21 = 2 Door Sedan
22 = 2 Door Special
Coupe
24 = 2 Door Hatchback
27 = 2 Door Convertible
35 = FWD Van
36 = FWD Wagon
41 = 4 Door Sedan
44 = 4 Door Hatchback
45 = 4 Door Station
Wagon
49 = Limousine
NA = Not Available NA = Not Available


here is the key to the L Bodies:

M = L - Body -
Horizon/Turismo
Z = L - Body -
Omni/Charger

L44 is the L Body 4 DR Hatchback

L body ign lock is the easiest to replace
remove both cover pieces , use hacksaw blade to cut plastic from behind drift pin that retains the cylinder
punch out pin driving it back (to cluster) and all the way out
pull out cylinder , swap in replacement and drive pin back in from the front

should take no more than 5-10 min
way way to easy to steal....

if you have a few door locks you should be able to salvage the correct tumblers to match a key

I did my door locks on my 73 roadrunner years ago - I only had three sets of locks to scavenge the tumblers from