HELP do you guys think this will leak??????????
We have a groove on our forged common block crank. We were told the seals cut the grooves into the shaft and that it can cause an oil leak. What are yalls opinions on this?
Here is a link to the photos of the grooves on youtube: https://www.youtube.com/watch?v=p6mGjJ_F7sQ
Thanks,
Dodgie Racing
Re: HELP do you guys think this will leak??????????
Front end you can almost see the wear mark, don't really see a grove in the video. can't they just polish it up?
Re: HELP do you guys think this will leak??????????
no they are about an 1/32" deep.
Re: HELP do you guys think this will leak??????????
What you need is a speedy sleeve to repair it:
https://www.rockauto.com/en/moreinfo...023&cc=1089378
Quote:
Originally Posted by
Koenig
no they are about an 1/32" deep.
Sent from my LG-H900 using Tapatalk
Re: HELP do you guys think this will leak??????????
I had a really deep groove on a customer's CSX like that. I dropped the oil pan so I could see the other side of the seal and just tapped the seal a tad beyond the groove. No leaks. Or a speedy sleeve is another option.