-
6 Attachment(s)
Stock Cal Repository
Here's all of the stock/MP cals I have. If you have a cal not listed, please post it up. Maybe we can make this THE resource for all of our stock cals.
I propose that we follow a specific naming convention so that we don't get cals mixed up and/or double posted. I know it will be tough to find once this thread starts getting full, but I think we should try to keep the reposts to a minimum.
I currently use the format : year_displ_type_trans_ID_[special].bin (The 'special' is optional for MP or DC cals).
For example - 88_22_t1_atx_123_MP.bin
The ID is the last 3 digits of the PN on the chip. The number on the outside of the housing is often different. Especially if the computer is a reman or an MP part. You can also get the ID from the .bin itself. It's the 1st 2 bytes of a LM cal and the 3rd/4th bytes in a SMEC/SBEC cal.
Also, post the table or calx files with the zip whenever possible.
Up first, the '85 Files...
-
9 Attachment(s)
Re: Stock Cal Repository
-
9 Attachment(s)
Re: Stock Cal Repository
Here's '87...
EDIT 10/18/10: Added the 078 Shelby Lancer 2.2 T2 Auto cal, updated all of the T2 table files to be MP Tuner compatible. T1 are still the old style table files, sorry.
EDIT 7-9-11 Brian Bucar - Added the 87 T2 .inj injector scale file for use with MPTuner 1. Copy it into the folder where your 87T2 stock calibration is and rename it the same as the .bin file and then open it and edit the first line to read the same location on your hard drive where the .bin file is.
-
6 Attachment(s)
Re: Stock Cal Repository
-
4 Attachment(s)
Re: Stock Cal Repository
-
10 Attachment(s)
Re: Stock Cal Repository
'89 2.5 t1 files...
I could've sworn I had the '89 T1 ATX MP cal as well. I'll have to look for it.
EDIT: Added 2 files. 135 and 529. The 529 file appears to be for cold weather/Cananda. It has no A/C and the cold start tables are slighty changed from the US-Spec cals.
EDIT: the 353 cal is actually the ATX MP Cal. I updated the data set accordingly. Also added some new stock cals.
EDIT: Completely new .tbl files compatible with MP Tuner. 100% complete and the same naming conventions as T-SMEC.
-
6 Attachment(s)
Re: Stock Cal Repository
3.0 cals!
EDIT 3/8/11: Added '90 SBEC 3.0 cal with table file. Updated the table file for the '89 cal (A107).
-
2 Attachment(s)
Re: Stock Cal Repository
Masi Cals! (Added 2.2 T2 Auto cal!)
-
2 Attachment(s)
Re: Stock Cal Repository
-
2 Attachment(s)
Re: Stock Cal Repository
-
6 Attachment(s)
Re: Stock Cal Repository
-
1 Attachment(s)
Re: Stock Cal Repository
91 T3 cal
EDIT: Added complete table file created by my relo source for the T3. If you want to edit the original binary, this is it...
-
3 Attachment(s)
Re: Stock Cal Repository
-
1 Attachment(s)
Re: Stock Cal Repository
-
1 Attachment(s)
Re: Stock Cal Repository
'92 2.5 T1 cal (table file is mostly empty)
-
Re: Stock Cal Repository
I just posted a complete update to the '89 2.5 T1 files. All new table files, 100% complete and compatible with MP tuner. In case you want to compare, or if you just don't want to use T-SMEC. I'm not positive, but I think these will work for MAP scaling, but not for injector scaling. The needed info for injector scaling cannot be stored in the .tbl file...
Look on page 1 for the '89 2.5 files...
-
Re: Stock Cal Repository
rob - if an .inj file is manually created (or copied from tsmec and then change the address locations) you should be able to scale for injectors. when a bin is loaded mptuner will look for the .inj file and, if found, populate the injector scaling table with it.
-
Re: Stock Cal Repository
Added the 078 Shelby Lancer 2.2 T2 Auto cal, and updated all of the T2 table files to be MP Tuner compatible. T1 are still the old style table files, sorry.
-
Re: Stock Cal Repository
should that maybe read '89 instead of 078? anyways just wondering if the SBEC-II files are next :D sorry for the bugging. keep up the good work
-
Re: Stock Cal Repository
No, 078 is the cal ID. It's an 87 T2 LM cal.
The SBEC files will get updated table files next. SBEC-II is still a ways off...