I am on the hunt for the allusive coolant overflow bottle for my 1988 dodge shadow csx-t. also if anyone has the trim peice for the drivers door interior pull handle that would be greatly appreciated as well
Printable View
I am on the hunt for the allusive coolant overflow bottle for my 1988 dodge shadow csx-t. also if anyone has the trim peice for the drivers door interior pull handle that would be greatly appreciated as well
Are you referring to the arm rest for the door?
the peice that goes around the pull handle for exiting the door. sorry if my wording was not clear.
I think I have one.Quote:
Originally Posted by mrchriswray
I'll look and see if I have another spare. All Shadows and Sundances used the same bezel. 2 and 4 door.Quote:
Originally Posted by mrchriswray
Are you looking for the coolant overflow for the non intercooled radiator? I have a few of those. The intercooled radiator overflow was different.
First generation Dakota also uses the same door handle trim piece.
The car is the CSX-T with the intercooler. Good to know the non-turbo is different than the NA motor. SO glad Chrysler planned ahead for that one. :-|
N/A and turbo I is the same- Intercooled P-body is unique.Quote:
Originally Posted by minigts
A stock CSX-T has no intercooler from the factory.
You need to find a 87 CSX coolant recovery tank.
Wow, didn't know that. Thanks for the info Gary! We told Chris there was a wealth of knowledge on the site. :thumb:Quote:
Originally Posted by mopar-tech
The intercooled version didn't have an overflow tube and used a cap from a B series van if I remember right. This different cap has the overflow tube built into it.
Theres a thread here, somewhere, about it.
Found it:
http://www.turbo-mopar.com/forums/sh...t=csx+overflow
1987 CSX
1 4140 461 1 M,Z TANK, Coolant Reserve
2 6100 046 1 M,Z NUT
3 4266 968 1 CAP, Coolant Reserve Tank
4467 482 1 P Shelby
4 4266 423 1 K,E,G TUBE, Radiator to Coolant Reserve Tank (serv. in 50 ft. roll)
4266 423 1 J,H,S
4026 148 1 M,Z,B,F
4266 693 1 P
4419 984 1 L Z-24 Shelby
4026 148 1 P Shelby
5 TANK, Coolant Reserve
4266 694 1 P up to 8-19-86
4401 050 1 P after 8-19-86
4467 463 1 P Shelby
6 2448 761 1 CLAMP
7 #4401 324 1 K,E,G,H TANK, Coolant Reserve
4401 324 1 J w/o Level Sensor
4401 325 1 J w/Level Sensor
8 4339 418 1 J SENSOR, Coolant Fluid Level
9 4401 305 1 H,K TANK, Coolant Reserve
10 4140 741 1 B,F,G TANK, Coolant Reserve
COOLANT RESERVE TANKS
Figure 7-1900
—————————————————————————————————————————————————— ———————————————————————
4467463 is the reservoir for the CSX. have these NOS
4467482 is the cap. have some used ones
the 88 part book shows NOTHING specific for the CSX:
1 4140 461 1 M,Z TANK, Coolant Reserve
2 6100 046 1 M,Z NUT
3 4266 968 1 CAP, Coolant Reserve Tank
4 4266 423 1 J,K,G TUBE, Radiator to Coolant Reserve Tank (serv. in 50 ft. roll)
4266 423 1 E,H,C,S
4026 148 1 M,Z,B,F,G
4266 693 1 P
5 4401 050 1 P TANK, Coolant Reserve
6 2448 761 1 CLAMP
7 4401 324 1 K,E,H TANK, Coolant Reserve
4401 324 1 G up to 4-25-88
4401 521 1 G after 4-25-88
4401 324 1 J w/o Level Sensor up to 4-25-88
4401 521 1 J after 4-25-88
4401 325 1 J w/Level Sensor up to 4-25-88
4401 522 1 J after 4-25-88
8 4339 418 1 J,C SENSOR, Coolant Fluid Level
9 TANK, Coolant Reserve
4401 311 1 C w/o Overhead Console
4401 331 1 C w/Overhead Console
10 4401 305 1 H,K TANK, Coolant Reserve
11 TANK, Coolant Reserve
4140 741 1 B,F,G up to 5-16-88
4401 538 1 B,F,G after 5-16-88
Correct.Quote:
Originally Posted by martin kolner
As shipped from the factory and Shelby the CSX-T cooling system was bone stock Turbo I and the same as any other P-body with a turbo or N/A engine made that year.
it is the intercooled radiator. can you PM me
thats good to know on the sundance and shadow crossover for the bezel. (THATS THE WORD I WAS LOOKING FOR) my raditator is intercooled.Quote:
Originally Posted by ajakeski
If the reservoir is the same as Gbody t2 I have a few used I don't need
87 CSX only. G-body intercooled is different.Quote:
Originally Posted by Xtrempickup
89 CSX has a different part number.