Gaskets

https://uploads.tapatalk-cdn.com/202...6883578367.jpg
The other day I ordered a gasket kit from autozone for 50 bones just to see what it was all about why not.
https://uploads.tapatalk-cdn.com/202...86219624c3.jpg
This is an intake/exhaust manifold gasket from felpro and the one that came in the “kit”.
https://uploads.tapatalk-cdn.com/202...e901f8322d.jpg



https://uploads.tapatalk-cdn.com/202...44fe9c7225.jpg
So I guess felpro supplies victor reinz but for the 50 bucks I figured to have a bunch of extra gaskets that seemed of decent quality never hurt. I will be using the intake/exhaust mani gasket seems a lot thicker then the blown out one that came off the car and I’ll be using the head gasket with some headbolts? What do you guys usually use?

I just thought I’d post this up for anyone looking for a decent gasket set (in my opinion) for a decent price (in my opinion).


Sent from my iPhone using Tapatalk

The FP intake gaskets are good. Some people like the nes FB head gasket. I’ve never used one, I have a stack of Mopar head gaskets.

Quote:

---

Originally Posted by ajakeski

The FP intake gaskets are good. Some people like the nes FB head gasket. I’ve never used one, I have a stack of Mopar head gaskets.

---

I’m gonna try out the head gasket it looks good it just has some extra holes compared to the MP gasket that I took off.


Sent from my iPhone using Tapatalk

Rockauto usually has those sets for really cheap. Amazon generally does too. I wouldn't hesitate to use the Felpro gaskets, but I've recently seen that the Mopar gaskets can be had for less than $30.

It's not recommended to use a gasket on the int shaft seal retainer.

Anaerobic sealer. Mopar prefered.

Thanks
Randy