WTB: Lots of stuff

Before I go everywhere and try to get stuff, I'm going to give here a shot. Here's the list:

Front Mount Intercooler
Clutch/Pressure Plate rated for at least 300 hp
Blow Off Valve
a555 bearing support plate
3.50 to 1 final drive parts from an 87-88 a520
Quaife for a neon :nod:
Bobble strutt bracket that welds to the K-frame
24mm master cylinder
8 bolt flywheel

Let me know what you've got...

We will be stipping out a 91 Shadow sometime next month and the car has a Dual Friction Center Force Clutch-Pressue Plate--Throw Out Bearing in a a555.
The tranny is sold however the clutch is up for grabs. BUT not until I get it out.
So if you are interested in that let me know. We are located in NE Ohio (44266)
The setup has about 11,000 miles on it.

Chuck

I have an srt-4 intercooler for $115 shipped
I also have a new Turbo XS type s BOV for $95 shipped

friend of mine has new chromoly end plates that fits a 525, 520 and 555
if interested let me know. I can get him in contact with you.

PM Sent. :D

Quote:

---

Originally Posted by BIG PSI

We will be stipping out a 91 Shadow sometime next month and the car has a Dual Friction Center Force Clutch-Pressue Plate--Throw Out Bearing in a a555.
The tranny is sold however the clutch is up for grabs. BUT not until I get it out.
So if you are interested in that let me know. We are located in NE Ohio (44266)
The setup has about 11,000 miles on it.

Chuck

---

I don't know about the clutch. If it comes out and looks outstanding, let me know...but I would like the flywheel that is in the shadow. When do you think you are going to get it out? I'm trying to move this project along, so I'm trying to get ALL the parts I can see me needing now.

Quote:

---

Originally Posted by greedy

I have an srt-4 intercooler for $115 shipped
I also have a new Turbo XS type s BOV for $95 shipped

---

I think I'll be pushing the capacity of the srt-4 cooler when everything is said and done with the charger.

Send me some pics of the type s to mkessin(at)clemson(dot)edu...I'm definitely interested.

Quote:

---

Originally Posted by jaysshelby

friend of mine has new chromoly end plates that fits a 525, 520 and 555
if interested let me know. I can get him in contact with you.

---

Are the end plates the same as the bearing support plates? If so, I'm game. I'm definitely interested.

Quote:

---

Originally Posted by mario

PM Sent.

---

PM responded to :thumb:

Thank everybody.

Quote:

---

Originally Posted by The S is Silent

24mm master cylinder

---

You can get these pretty cheap at an auto parts store. You can even return your old 24 mm master cylinder as a core. ;)

sent pm

I have officially recieved EVERYTHING on this list. Thanks to everybody that offered up parts, and thanks to everybody that I got stuff from.