TI complete engine, +40 injectors, 1pc intake, big turbo

Date: 20th December 2012
Username: boneyardracing
Full Name: Blair Warner
City, State, Zip: York PA 17406
Contact: bwarner@boneyardracing.net 717-968-6083
Price: $750 for the lot

Freshly rebuilt TI non common block 2.2 TI 6 Bolt Crank. The engine spins and has compression. New gaskets and seals. Requires 6 bolt turbo flywheel that is not included. Currently installed on the engine are:

1pc TII intake with 52mm throttle body: $100
+40 Mopar Performance Injectors: $100
Garrett style Chrysler T3 exhaust manifold: $50
50trim T4 compressor housing and wheel mated to OE Garrett turbo $100
Long Block: $300

Or take it all for $600. I can deliver if need be.

http://i136.photobucket.com/albums/q...g/IMAG0433.jpg
http://i136.photobucket.com/albums/q...g/IMAG0434.jpg
http://i136.photobucket.com/albums/q...g/IMAG0437.jpg


Here are some better pics with out the name tag I apologize if this is against the rules

http://i136.photobucket.com/albums/q...g/IMAG0422.jpg
http://i136.photobucket.com/albums/q...g/IMAG0421.jpg
http://i136.photobucket.com/albums/q...g/IMAG0420.jpg
http://i136.photobucket.com/albums/q...g/IMAG0424.jpg TII valve cover $25
http://i136.photobucket.com/albums/q...g/IMAG0423.jpg
http://i136.photobucket.com/albums/q...g/IMAG0419.jpg
http://i136.photobucket.com/albums/q...g/IMAG0418.jpg FWD Performance stage 5 ecu for 87 electronics $150

Ive been out of the TM seen for awhile if the prices are off base just let me know feel free to make offers

Do you know anything more about the turbo? What compressor and turbine wheel?

.48 turbine wheel
.63 compressor wheel
2" outlet
3" inlet
Journal bearing center section

Hmm ok. That tells the A/R of the housings but not what the wheels themselves are.

If you find any other info on it, post it up. If not i cant really tell what the heck it is. I think the price could be very good depending on what it actually is. Good luck with sale!

Im sorry to say that is all I know again just to be 100% clear its based off of a Chinese/Ebay turbo I built it awhile back and just dont know much about it. How would I go about finding out what the wheels are?

You would have to remove the compressor housing and measure the diameter of the front and back of the wheel (inducer and exducer diameters). The exhaust side you could probably leave the turbine housing on and just remove the swingvalve housing and just take a pic since it's pretty easy to identify turbines in our stock housing just by looking at them.

It looks like a 50-trim compressor housing, wheel and backing plate on a stock turbo. The China turbo center sections are non-watercooled.

That may very well be as I said its been quite some time since it was put together and frankly I dont remember much about it. Is there something wrong with my computer or are the pictures gone?

Price reduced on the the lot $600 for everything

Forgot to mention, if it is a 6 bolt crank it is a 2.2 as there were never any 2.5s with a 6 bolt crank. 6 bolt turbo motors did get the 'big rods' that are basically the same as t2 rods but with pressed pins.

Edited first post with corrections. I apologize for the errors.

$400 for the engine, turbo, intake, and, injectors.
$100 for the A555
$100 for the computer


Somebody has to want this stuff. Pretty much any offer will be accepted! Best to call or text 717-968-6083

how much for the turbo and injectors shipped to 78501?

Thanks!

Someone from Hanover texted me last night sorry I lost your number. Everything you were looking for is avaliable

Injectors sold

hey you live near me!! how well do those turbos run with out the use of the coolint flowing through them? does it affect the life of the turbo? i know my buddies cummins turbo only has oil flowing through it.

^ Turbos were not water cooled for a long time. You need to give it a minute or two to cool at idle before you shut the car off no big deal.

i always wounderd about that thanks for clearing that up with me, would you sell just the turbo?

Sure $100 sound fair?