Assembly Lube/Paste

Allo,

Gonna be re-ringing the 2.2 in my GLH, and due to the weather, I will not have the opportunity to start/seat rings for a few months. Last time I used a very thick assembly oil, but I was going to be starting it soon after completion... This time, i'm hoping to use a paste-style lube, which will stay on thee journals and not eventually leak down into pan.

Now, looking for suggestions on paste-type assembly lube.... what's good/what's sh!t? opinions?


Thanks,
Dominic

LUBRIPLATE L0034-094

lubriplate assembly lube

This is what i always used. .

https://www.amazon.com/CRC-SL3331-Ex.../dp/B000M8RYUE

Run it with that for about a hour. then drain the oil

let it get good and warm and rev the motor .

comes out like greese.

I acquired a bunch of Royal Purple Max-Tuff assembly lube from work and I have had good luck with it.

In a pinch, STP and 30Wt... Otherwise Redline... https://smile.amazon.com/Red-Line-RE...s%2A=0&ie=UTF8

Mike

Lubriplate 105 here. Never a problem.

Awesome!!

Thanks guys!

Here's another good choice: https://www.amazon.com/Torco-A550055...+assembly+lube

Torco, good stuff as well!

Mike