BMF intake 655 edition!

Printable View

07-11-2017, 07:04 PM
acannell

BMF intake 655 edition!

Just machined the first ever BMF head flange designed for the 655 head. Its a HUGE hole!

Only a few spots left on the 2017 BMF group buy!

http://www.turbo-mopar.com/forums/sh...-BACK-for-2017!

https://s26.postimg.org/ajlj0s3y1/20170711_154913.jpg
https://s26.postimg.org/ptle7yzg9/20170711_155549.jpg
https://s26.postimg.org/edez9xla1/20170711_155620.jpg
https://s26.postimg.org/ca4k29lh5/20170711_155623.jpg
https://s26.postimg.org/dg8k129rt/20170711_155715.jpg
07-12-2017, 04:50 AM
glhs875

Re: BMF intake 655 edition!

That's a good bit more port area!!!!
07-12-2017, 09:07 AM
thedon809

Re: BMF intake 655 edition!

Is that going to have any issues sealing against the head? Looks pretty thin.
07-12-2017, 10:18 AM
acannell

Re: BMF intake 655 edition!

Quote:

Originally Posted by thedon809

Is that going to have any issues sealing against the head? Looks pretty thin.

I would say if the non-655 head flange seals, this one would. I mean its not like the thinner section is going to bend. So I suppose it has to seal. I think.

All times are GMT -4. The time now is 03:57 AM.

Image resizer by SevenSkins

This site is 100% supported by its members. Turbo-Mopar.com is in no way affiliated with Chrysler/Dodge or Mopar. The Dodge & Mopar logos and likeness are registered trademarks of Chrysler, LLC. The contents of this site are owned by Turbo-Mopar.Com and may not be used or reproduced without the express written permission of the Administrator.