Printable View
Yesterday I got a power loss light. I stopped and checked my wiring and all of my vacuum connections and hoses in the turbo system. Everything seemed fine so I did a code check and came up with a code 22. When I restarted the engine the power loss light wasn't on anymore. It didn't return when I drove the car. I know that the sensor is good because this code has come and gone in the past. Has anybody had this experience or do you know why this is happening.
Could be the coolant sensor is on its way out. Could be the connector terminals need cleaned.
I am suspecting terminal problems. I might replace the plug harness. I have tested the ohms reading and it falls where it should and will change with a temperature change.
- - - Updated - - -
Thanks for the link aj.
Newbie here...
So what is Code 22 telling us?
coolant temp sensor or associated wiring issue
http://www.thedodgegarage.com/turbo_codes.html