I broke a piece of plastic, am I screwed? - In-Tank Fuel Pump Filter

Hey Everyone -

I was attempting to install the 255 fuel pump into the airtex hanger assembly from rockauto to put inside the tank.

Had some troubles with getting the grommet to fit around the pump and seat correctly in the cup mount but thats a different issue.

During the process I managed to break off 2 of 4 plastic tabs that is part of the fuel pump filter for the bottom of the pump
(the picture shows 3 intact, now there are only 2 remaining)

Do you you know if there is a place that sells just the plastic mount for the filter? Or am I SOL and need to buy the entire assembly again?
https://i.imgur.com/hoJU3CF.jpg


Any and all help would be appreciated.

Thanks!
-Daytuna

BOSCH 68028 has what you need.

http://www.rockauto.com/en/catalog/d...+strainer,6212

Quote:

---

Originally Posted by tryingbe

BOSCH 68028 has what you need.

http://www.rockauto.com/en/catalog/d...+strainer,6212

---

HECK YES! I was looking in the right place, just at the wrong year :/ Thank you tryingbe!! :)