-
Bolt Sizes
The "Screw w/Washer, Rear Hanger Mtg."'s on the GLHS need replacing. In lieu of walking the aisles at the hardware store looking for a comparable replacement, what Chrysler documentation am I missing that would give size and thread of an individual screw?
The Service Manuals show the bolts, where they go, and what torque spec to use.
My 1986 Parts Catalog shows part number and description (#6501165) but no sizing.
Were sizes given anywhere?
http://cgwrr.com/Mopar/glhs0469_file...w-w-washer.jpg
-
Re: Bolt Sizes
Go to your local Aces hardware and you'll find a tool to measure the size of the bolt.
It'll be a metric one.
-
Re: Bolt Sizes
Right, I'm just curious where Chrysler might have inventoried the sizes.
-
Re: Bolt Sizes
I never seen a documentation of bolt size, though, I do have buckets worth of bolts and I probably have one of those size.
That bolt looks like it has a 13mm or 15mm head. If you want to measure it and pay shipping, I can send you the bolt from AZ that is not rusted.
-
Re: Bolt Sizes
Thanks for the offer. I did pick up replacement 10.9 bolts and will be installing them with blue Loctite. These are the rear trailing arm bracket to body bolts.