Differential a413 play in pin to case
Pulled the old shaft , well not that old out ,it was toast. Replaced the spider gears which were also damaged, but on reassembly there is play in the shaft to case! How much is too much. Does anyone in the West Coast of B.C. or Pacific Northwest have a complete carrier they can sell me for the 1990 a413 it’s a 12 bolt
The radial play in the shaft to carrier case seems the problem. Maybe sleeve the case?
Any ideas
Thanks
Re: Differential a413 play in pin to case
I think it's the bearings which determine how much radial play is in the diff? I'm not sure what the process is for setting the preload on the autos.
Re: Differential a413 play in pin to case
I have a case left over from my Posi experimenting days.
Too bad you weren't closer I have lots of parts.
Could mail you a case if you can't locate one.
Thanks
Randy
Re: Differential a413 play in pin to case
Thanks Randy , yes I could use the carrier and gears/ pin.
Let me know and I’ll transfer the money
Kim Wimmer
45072 Nicomen Cres
Chilliwack , BC
V2r0s1
Re: Differential a413 play in pin to case
I'll try and get it rounded up soon as possible and post a pic.
I'm working 1 handed so not as speedy as I would like.
Hopefully you're using the pin retainer clips.
I leave the roll pin out.
Thanks
Randy
Re: Differential a413 play in pin to case
Kim, PM your phone # and I'll give you a call tomorrow sometime.
Thanks
Randy
Re: Differential a413 play in pin to case
Hi Kim:
Is this your correct address??
The diff. just got returned, Canada Post claims no such address.
Thanks
Randy
Quote:
Originally Posted by
kwimmer
Thanks Randy , yes I could use the carrier and gears/ pin.
Let me know and I’ll transfer the money
Kim Wimmer
45072 Nicomen Cres
Chilliwack , BC
V2r0s1