2 Attachment(s)
NEW 17x9 rims...35mm offset...5x114/5x120 bolt pattern...2 1/2" Stainless lip
Date: 29th February 2012
Username: ATaylorRacing
Full Name: Angelo Taylor
City, State, Zip: Fishers, IN 46038
Contact: ataylorracing@comcast.net
Price: $420
S O L D
Re: NEW 17x9 rims...35mm offset...5x114/5x120 bolt pattern...2 1/2" Stainless lip
I love those rims, :love:
Re: NEW 17x9 rims...35mm offset...5x114/5x120 bolt pattern...2 1/2" Stainless lip
They might fit your AWD van with a LITTLE bit of spacer (5mm, smallest they make i think) if they have a >71mm centerbore.. :p
Re: NEW 17x9 rims...35mm offset...5x114/5x120 bolt pattern...2 1/2" Stainless lip
Quote:
Originally Posted by
Vigo
They might fit your AWD van with a LITTLE bit of spacer (5mm, smallest they make i think) if they have a >71mm centerbore.. :p
They probably would but no spare cash right now, :mecry:
2 Attachment(s)
Re: NEW 17x9 rims...35mm offset...5x114/5x120 bolt pattern...2 1/2" Stainless lip
They might fit with no spacer. I know that this rim on a 2001 Voyager V6 with a 235/55/17 tire only sticks in 1/10th inch compared to the stock 15s with 215/70 tires and the outside side wall is out only 7/10ths. I put Mustang GTs from 05 on our Voyager...they have the same offset as our rim, but since they are wider and the tire was wider they stick in 4/10th and out 4/10ths. The spokes did not clear the brakes so I had Durango(?) studs put in place of the stock ones..about 1/4 inch longer and fine thread, they put on the Mustang rims using 7/32nds spacers with no trouble at all.
Attachment 37866Attachment 37867
Re: NEW 17x9 rims...35mm offset...5x114/5x120 bolt pattern...2 1/2" Stainless lip
BTW, these Mustang GT rims with tires are also for sale...$200.
Re: NEW 17x9 rims...35mm offset...5x114/5x120 bolt pattern...2 1/2" Stainless lip
Well, im almost completely certain they wont fit in the front because a van like simon's awd one has basically all the same suspension and clearances as a k-car and i have very little clearance with a 8" wide +35. I think 8.5 is the widest ive heard of anyone running on that kind of front suspension in this forum.
As for the back, i have an AWD rear axle in my 90 van and can't fit some 18x8+50 without spacers (basically because of the tires on them). I compared 8" +50 to 9.5" +35 in a wheel offset calculator and they have basically the same inside clearance.
So my experience + educated guess is it wouldnt actually work on a van very easily.. and if i thought Simon would have actually bought them i would have said that right away... hehe
Those wheels will be great on something, but it probably wont be front wheel drive! Good luck with the sale.
Re: NEW 17x9 rims...35mm offset...5x114/5x120 bolt pattern...2 1/2" Stainless lip
Then they fit the newer minivans with the 5x114 bolt patten.
Re: NEW 17x9 rims...35mm offset...5x114/5x120 bolt pattern...2 1/2" Stainless lip
Bump with a price reduction....down to $440 now.
Re: NEW 17x9 rims...35mm offset...5x114/5x120 bolt pattern...2 1/2" Stainless lip
BUMP....price reduced to $420!
Re: NEW 17x9 rims...35mm offset...5x114/5x120 bolt pattern...2 1/2" Stainless lip
Do you still have 17"x9", 5x120 wheels in stock? If so what is the price and shipping to zip 95453?
Thanks
Bruce Brower
---------- Post added at 03:02 PM ---------- Previous post was at 02:56 PM ----------
Price is OK. What is the shipping (by slow boat method) to zip 95453 ). How is the offset measured? What is the dimension from the back side of the center (mounting surface) to the backside of the outer rim? I think the 5x120 pattern matches a BMW 3 series. Can you confirm that?
Thanks much
Bruce
Re: NEW 17x9 rims...35mm offset...5x114/5x120 bolt pattern...2 1/2" Stainless lip
I'm sorry gang...I sold these a couple of months ago and did not think about deleting this post since there had not been any interest in them since March.