Re: 1989 Pbody to 1990 SBEC
What is there to gain in this swap?
Re: 1989 Pbody to 1990 SBEC
no more batch fire injectors. the charge intake sensor plug is on this harness as well.
Re: 1989 Pbody to 1990 SBEC
I don't have 90 wiring diagrams for the P body but I believe NAJ on the other site does
Re: 1989 Pbody to 1990 SBEC
I'll probably be out in the garage today. I'll try to remember to bring in my 90 FSM and put up some scans. Are you looking for the 90 P body pages which match the ones you posted from 89?
Re: 1989 Pbody to 1990 SBEC
Yea if you get a chance, Id appreciate it.
6 Attachment(s)
Re: 1989 Pbody to 1990 SBEC
I thought this would be easiest since the file size limit is so low. I can control that very well, but it makes the depth of field rather shallow. If you need anything reshot, or would just like actual scans, let me know. If you need anything else, let me know too.
Attachment 63951Attachment 63950Attachment 63949Attachment 63952Attachment 63953Attachment 63954
Re: 1989 Pbody to 1990 SBEC
Re: 1989 Pbody to 1990 SBEC
No problem. Don't hesitate to ask for anything you might need. If those are acceptable, it takes only a few minutes to put that up for you.
Re: 1989 Pbody to 1990 SBEC
PG 73 74 could use focus at the bottom, cant' make it out. this is 1990?
somethings not right, I don't have that 3 pin, more research required. humm
Re: 1989 Pbody to 1990 SBEC
Don't worry about it cordes, I got a clear copy off of NAJ
Re: 1989 Pbody to 1990 SBEC
Those are from 90. If you need anything else just let me know.