Congrats!! :thumb:
Printable View
Congrats!! :thumb:
** looks at the reaction times**
I want you first round!!
Car is flying though.
LOL, wasn't trying ;) Luckily I had enough 4-banger to cover anything in the other lane :D
Took a quick photostop on the way to the staging lanes :)
http://www.badassperformance.com/mri...ove_08se08.jpg
That's a pretty BadAss shot! Fix that 2nd gear or the driver!
I took a few more, will post later :)
I'm new to A568's anything in the trans able to lock you out of 2nd at 7k rpm?
Is there any binding or anything in the shifter? Are your cables laying naturally or are they pulled out of the way of the exhaust, etc?
I need to check everything still...
Wow a free dyno pull yesterday at teh CMC/SDAC-Chicago meeting up at Westech in WI. The dyno results were kinda goofy, for some reason it was calculated as crank hp? but I do not know what correction factor was used since it was measured at the wheels? Here are the numbers and guessing 35% loss for FWD???
588.1 @ 5586rpm hp (so 35% loss ~ 382whp?)
551.8 @ 5586rpm tq (35% loss 358tq?)
This was at 21-22psi... got another exhaust leak now, he said the header was bright red :eek: and it looks like the back of the headgasket is nice and oily :(
I think a 35% loss is a little too much, especially through a manual trans. I've heard more like 15-18% is more like it.
Either way, nice numbers and even better that it was free.
thats the problem, they didnt have a correction factor when I asked, so who knows... nice numbers.. maybe a tad off tho...
yeah, free except the head coming off now, LOL!
What headgasket are you using? Is the oil from the driver's rear corner?
Sorry to hear about your ongoing issues with gaskets.
I know...just JB WEld the friggin thing together! ;) :thumb:
got any vids of ur runs???
Stock mopar headgasket, will have it off here shortly...
Doesnt look like any vids of the runs, the "REC" vs. "STANDBY" modes on the camera seem to have been mistaken
nope, no kidding about that :(
-Impressed a few, got some compliments.
-A streetrod diagnosing a vibration, then power pulls by an older Wagon and Hemi Rumble Bee Ram
-mine was 11.5:1 the whole pull... I'm going to order another sensor for good luck, LOL! they put a sniffer in the tailpipe but I did not see what it read ???
-nope...
after looking at the exhaust gasket... I know why it only made 21psi :(
LOL, no doubt!
Thats Awesome Jt!!!!!!! ,alan Johnson, And His ProstoCker ,would Envy You
Well Kinda,,kick Butt