Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
Date: 16th February 2020
Username: mopar-god
Full Name:Frank Godish
City, State, Zip: Bridgeton, NJ 08302
Contact:moparfgod@aol.com
Price: 100.00 + shipping
Description: Mopar Intake Manifold Casting # 4387233 For Various 2.2L 88-91 Chrysler Turbo. Looks like it has had some port work done.. $90.00https://scontent.fewr1-5.fna.fbcdn.n...aa&oe=5F017411https://scontent.fewr1-2.fna.fbcdn.n...d3&oe=5EB8B395https://scontent.fewr1-5.fna.fbcdn.n...56&oe=5EB7615Bhttps://scontent.fewr1-6.fna.fbcdn.n...59&oe=5EBE63D1https://scontent.fewr1-1.fna.fbcdn.n...b1&oe=5EB7E088
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
that is the plain jane 1 piece intake. we are all tripping over those ones.
its the 2 piece that gets the benjamin's..... sorry dude. :)
Brian
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
so I should toss it in the scrap pile?
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
Quote:
Originally Posted by
mopar-god
so I should toss it in the scrap pile?
They are good to practice porting, I was given a number a while back. I understand the black one piece are thinner and prone to cracking.
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
Quote:
Originally Posted by
Aries_Turbo
that is the plain jane 1 piece intake. we are all tripping over those ones.
its the 2 piece that gets the benjamin's..... sorry dude. :)
Brian
Not that it'll bring money, but that's a TII one piece intake. I think the ports on them are better than the standard one piece intakes. The ones I've seen are anyway. There's a much less pronounced hump in the runner for the bolts. I would think that it was a running change, but every TII one piece I've owned has been like that, and I haven't noticed a TI one piece like that yet.
ETA: Added that I hadn't actually noticed a TI one piece like that yet since I was only aware of this in the last couple years. I've only had 2-3 TII one piece intakes, so that's a small sample size.
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
Quote:
Originally Posted by
mopar-god
so I should toss it in the scrap pile?
no ... it's a part you can probably TRADE easier than sell
that has much value in it's self.. just differently
cash is always nice but "A" part can be better .. if you need it
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
okay. Yes cash would be best! Maybe I'll save it for Carlisle.
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
If anyone can use it make an offer. I saw new for 140-150 so that is why I started at $100. :thumb:
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
No offence brother but they are worth like $40 bare. I have one sitting in my junk pile that was complete with injectors and throttle body and nobody would buy for $75.
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
Quote:
Originally Posted by
thedon809
I have one sitting in my junk pile
I was given three of these as they were going to the scrap yard. The PO could not sell them for $10 plus shipping.
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
All is not lost, there was someone who modded a 1 piece to basically remove the runners and then add a plenum. It looked like alot of work, but would like to know how it worked at the track.
Sent from my ONEPLUS A6000 using Tapatalk
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
Quote:
Originally Posted by
wheming
All is not lost, there was someone who modded a 1 piece to basically remove the runners and then add a plenum. It looked like alot of work, but would like to know how it worked at the track.
Sent from my ONEPLUS A6000 using Tapatalk
I also seen someone cut it apart, hog it out and weld it back up. I don't recall the OP reporting back on how it worked out.
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
is there a way to delete this??
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
Quote:
Originally Posted by
wheming
All is not lost, there was someone who modded a 1 piece to basically remove the runners and then add a plenum. It looked like alot of work, but would like to know how it worked at the track.
Sent from my ONEPLUS A6000 using Tapatalk
ask Shadow re the modded 1 piece
you know .. blue charger , Manitoba Ca..
goes like hell .. might be an understatement..
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
Quote:
Originally Posted by
Dr. Johny Dodge
ask Shadow re the modded 1 piece
you know .. blue charger , Manitoba Ca..
goes like hell .. might be an understatement..
I don't think he was the only one who did some.
But he might have the best data on how well it worked after.
Sent from my ONEPLUS A6000 using Tapatalk
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
I run a modded 1 piece not sure if shadow did one but like you guys have said a few people have done them I think Joey from Canada and crazy eye and few others I believe there are even a few threads on here about them the one I run is from Forward Motion he sold them also as a max flow 1 piece. I have gone mid 10s with it as part of the set up on the car .
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
If the 89-up TII/TIV cars ever become super collectible, this will be nice to have.
Re: Mopar Intake Manifold Casting # 4387233- 88-91 2.2 Chrysler Turbo
Quote:
Originally Posted by
contraption22
If the 89-up TII/TIV cars ever become super collectible, this will be nice to have.
too bad you ruined your Horizon by modifying it Mike, could you imagine what it would be worth if you kept it original :lol: