-
Gauging Interest..... We are working with a wire harness manufacturer........
Gauging Interest..... We are working with a wire harness manufacturer who confirmed they have all the Chrysler connectors required to reproduce these for our vehicles. Initially we want to start off slow by offering fuel injector harnesses. If our expectations are met we will look into having complete harnesses reproduced. That includes the Uber Rare MP Super 60 L-Body Engine Harness. Which Fuel Injector harnesses would everyone like to see available and how many of each would you purchase? We are looking to have the 2 most popular ones reproduced so it's important that you are specific on your preferred year injector harness and TI/TII/TIII or TIV. Target price would be around $75. each. but could go down if enough orders are received. We look forward to everyone's input.
Chris-TU
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
Thank you for doing this.
The 86-87 TII injector harness is hard to find and usually missing when you see used manifolds for sale. I bought a couple NOS injector harnesses over the years and even those are starting to get stiff and fall apart. New harnesses made with modern materials would be great.
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
I would think the 88-89 TII injector harness would be high on the list.
I would certainly be in for at least 1.
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
86-87 TII harness would be great as I use the two piece intakes on most of my builds. I would definitely buy 2 or 3.
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
87 T-2 injector harness should work in any Logic Module turbo car same year or earlier that has same sub-harness connector
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
Wow! A new harness... I would be interested in an 87 turbo II injector harness
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
Chris,
You might consider having the 87 6 pin rectangular "body" harness style CONNECTOR available for guys running 85-86 LM cars. That would be the female side. Also having detonation sensor, and for 89 TII engines the charge temp sensor wires included in harness, so once again one harness fits all. User just remove wires as needed per instructions. That way one harness could cover 85-89, sort of like your one size fits all radiators. Either that or make the charge temp sensor available as a option for 89 TII vehicles.
$75 is a very low price. I have a few NOS harnesses and I paid WAY over that price when they were still available.
I would also think the alternator and the starter harnesses would be popular.
The wiring harness manufacturer must have a source for multi-gauge terminals for both male and female sides. I gave up trying to locate the larger gauge terminals. They also fit the bulkhead connector. I had a source and when I went to purchase, they were discontinued. Salesperson confirmed terminals were scrapped for space needed in warehouse. They had thousands of them...
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
I think this is a great idea and would totally purchase a new fuel rail sub harness that was OEM-like. Maybe if this takes off, starter and alternator sub harnesses with legit battery terminals could be next??
I once made a "Super 60" harness of my own and it was a TON of work. At the time, I didn't know what I was getting into, but I gained a lot of knowledge and I'm kind of weird in the way that I actually think it's sort of fun.
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
Agreed on the alt./ battery harness
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
What Todd said. I'd be in for several 86 TII and a 91 TIII.
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
Definitely starter and charging harnesses would be something to think about Chris like Todd said. They are impossible to locate.
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
i would be down for a TIV and TII. (SBEC 1990)
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
a TII two piece harness would be my wish
battery cable harness' would be great but they introduce the issue of plug changes over the years
a basic battery cable , + or - might be better with the other small wires left off so they can be added as needed by the buyer
pigtail repair sections might be a good seller as might the ais overlay harness as now we don't have a source
and mopar gods willing a L body s60 harness would be awesome .. but an 02 sensor overlay harness that could be added would be even better
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
86-87 TII, would take 2 or 3.
89 TIV, also take 2 or 3.
Sent from my SM-S903VL using Tapatalk
-
Re: Gauging Interest..... Wire harness manufacturer.....**UPDATE**
IT'S A GO!!!!
Samples of the Batch and Sequential Fire Fuel Injector wiring harnesses have been sent to the manufacturer. We are waiting on test pieces and will provide updates as they become available to us.
Thank You to everyone who provided their feedback!!
A BIGGER THANK YOU goes out to our customers who have continued to support Turbos Unleashed for the last 21 years!! The dollars you spend at TurbosUnleashed.com is what helps us fund these new products. TU Frequent Buyers Club Members will receive a Discount on these harnesses. We are also working on a Discount reward program for those who fall short of our FBC minimums.
THANKS!!!
Chris-TU
PS- MORE EXCITING NEW PRODUCTS ON THE WAY!!
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
Nice work Chris.
Looking forward to seeing what becomes available.
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
Great news Chris!!!
Thanks
Randy
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
Wonder what the possibility of an L body smec conversion harness would be.....
Sent from my SM-N950U using Tapatalk
-
Re: Gauging Interest..... We are working with a wire harness manufacturer........
There are many possibilities to consider, but, until we get our test pieces from them we don't want to make any commitments yet. They said sometime next month and we are hoping they don't lose interest. Manufactures cringe when they hear anything less than 1000 pieces. It's one of the many uphill battles we fight each day regarding sourcing parts for these niche cars.
Chris-TU