I'm actually trying to track these down now. I know who makes the housings and am getting quotes on all 4 key options. I have a Cardell and Mopar part number on the terminals as well.
Printable View
Anyone got any contact info for Chipdogg ?
I'm working on upgrading my fuel pump, and in the process found I have a dying Airtex E7040M. I'm trying to match the connector on it, which appears to be the same connector as is on the car's wiring harness (it plugs in to both sides of the bulkhead connector). The pumps changed in 1991, so anything older than that won't work. I have some pics to attach, but I guess my post count is not high enough. The connector has 2 pins and is marked AMP and has round female terminals inside. I'll try to edit or repost after I get some more posts here.
EDIT
Here are the pics via Photobucket:
http://i243.photobucket.com/albums/f...pstsvcxmlc.jpg
http://i243.photobucket.com/albums/f...psc1gnzkg2.jpg
http://i243.photobucket.com/albums/f...psey3fqfzj.jpg
http://i243.photobucket.com/albums/f...psegux8z7c.jpg
Does anyone have a source for a 4-wire O2 sensor pigtail, harness side? I can't seem to locate one for the life of me. Need the square one like is used in 89 and early 90's, I think.
used salvaged. I asked before about the idea of using a newer 4 wire sensor that one could get new connector shells and terminals for and the crickets chirped..
Really? I must have missed the post. I recommend using an O2 sensor from a Neon SRT-4. Use the Denso or the NTK.
http://www.rockauto.com/en/moreinfo....sn=492&jsn=492
The interfacing connector is TE. I actually outline what it is in my original post in this thread!
http://www.mouser.com/ProductDetail/...TAdssKDimMXw==
Here's a pic of a sensor I have in my computer bag at all times (for reasons unknown).
http://www.turbo-mopar.com/forums/at...id=61153&stc=1
No, sorry. It uses a Delphi Apex 2.8 series connector.
http://www.rockauto.com/en/moreinfo....431715&jsn=437
You might be able to use this coil pack in a TIII, if you can get it to fit.
It's the early 3.3/3.8 coilpacks that have the same plug. Not that they are any easier to find a new connector for :(
Well I just filed a dispute with PayPal over this, about 2 weeks and never got a shipment notice or tracking number, and have not received the wire nor any other communication from them, even after sending emails to their various addresses. So, guess I'll have to buy wire from somewhere else. Figured I'd update so others don't have the same hassle.
So before I mess up new connectors...how do the pins come out of the air temp and ias connectors? I cant see a release on the old ones or the replacements
They are a pull to seat design. The wires are fed through the connector and the pins crimped on and then pulled back to latch into place. You can use one of these type of tools HERE but there really not made to come apart and with it being fed through you cant change just the plastic housing anyways without cutting the pins off.
well that totally sux
Well all good things come to an end eventually.
Molex 33088-0009 for the 60 way plug appears to be no longer available unless your buying ALOT (1000+) at one time and even then.. Power and Signal is the only vendor showing stock @ .51 cents each.
Glad I bought some when I could, wanted to buy another couple hundred but darn... :(
That was just the pin connectors? Looks like one of them you need to order 15000.
Is the entire 60way plug available?
maybe you guys should ask Chris at Tu about this as he seems to now know someone who can manufacture harness sections ..perhaps , IF they see a market for parts too something could happen
- just thinkin out loud