-
Wiring issues.
Hello people, i'm looking for assistance, i'm trying to connect two wires to the computer harness, one is a orange wire with a blue stripe the other is a blue wire with an orange stripe i cannot seem to find it in the books i have so i'm wondering if anyone can help, the car is an Omni 1986 with upgraded wiring eg map under the hood four wire tps, these two wires are beating the hell out of me, so please your help is vital right now!!
- - - Updated - - -
Thanks i await you response!!
-
Re: Wiring issues.
We do need a bit more info. I assume you have the 1986 FWD wiring book of the FSM. What are at the two ends of said wires? I assume the ECU is at one end
We can get ECU info from http://minimopar.net/ecu/index.html
It appears you are working with the TPS voltage to ECU and the other is AC cutoff ....correct?
You can use the FSM to look up the circuit # and it will show you how the wires are routed
-
Re: Wiring issues.
N13 20 DB/OR* A/C cutout relay output
K7 18 OR/DB* Throttle position sensor (TPS) signal
http://minimopar.net/ecu/lm-1986-t1.html
Read this for TI to TII conversion.
http://fwdmopar.50megs.com/T2conv.html
-
Re: Wiring issues.
Thank you so much for your response chromeguy, it is appreciated. Thanks again!!
- - - Updated - - -
tryingbe thanks so much my friend your help is greatly appreciated. Thank you!!