Differential a413 play in pin to case

Pulled the old shaft , well not that old out ,it was toast. Replaced the spider gears which were also damaged, but on reassembly there is play in the shaft to case! How much is too much. Does anyone in the West Coast of B.C. or Pacific Northwest have a complete carrier they can sell me for the 1990 a413 it’s a 12 bolt

The radial play in the shaft to carrier case seems the problem. Maybe sleeve the case?

Any ideas

Thanks

I think it's the bearings which determine how much radial play is in the diff? I'm not sure what the process is for setting the preload on the autos.

I have a case left over from my Posi experimenting days.

Too bad you weren't closer I have lots of parts.

Could mail you a case if you can't locate one.

Thanks
Randy

Thanks Randy , yes I could use the carrier and gears/ pin.
Let me know and I’ll transfer the money

Kim Wimmer
45072 Nicomen Cres
Chilliwack , BC
V2r0s1

I'll try and get it rounded up soon as possible and post a pic.

I'm working 1 handed so not as speedy as I would like.

Hopefully you're using the pin retainer clips.

I leave the roll pin out.

Thanks
Randy

Kim, PM your phone # and I'll give you a call tomorrow sometime.

Thanks
Randy

Hi Kim:

Is this your correct address??

The diff. just got returned, Canada Post claims no such address.

Thanks
Randy

Quote:

---

Originally Posted by kwimmer

Thanks Randy , yes I could use the carrier and gears/ pin.
Let me know and I’ll transfer the money

Kim Wimmer
45072 Nicomen Cres
Chilliwack , BC
V2r0s1

---