Wiper Motor and wiring

I have go to a stand alone ECU system in my 88 dodge daytona and the book does not have a wiring diagram for the wiper motor. Does anyone have a wiring diagram or can help me with the wiring for it. This is for a race car and we only need two speed high and low.

thank you,
Adam King

The FSM should have this info in the wiring section

Quote:

---

Originally Posted by chromguy

The FSM should have this info in the wiring section

---

And even if you don't have it, there are only a couple wires which go to the wiper motor. It grounds through the mount, so make each one hot and see what you get out of it. I didn't think the 88 cars had a body control computer did they?

My 88 FSM shows four lines at the motor assembly. LMK if you want a picture.

@chromguy Yes please can you send the pictures. We have test the but getting weird results so hopefully that would help use get past them. thanks for the help.

How are the wipers controlled by the ECU?

We do not have the original ECU in the car anymore. We moved to a FAST system and we have rewired the car. So I need the diagram for the wipes at the wiper motor to know what wire does what. This car has been turned into a full on endurance race car.

PM sent
According to the FSM, there are 4 terminal on the motor. The one closest to the motor is "L" followed by "P1", "P2" and "H"

thanks you sir