E-brake Cable Collar Retainers

I figured I would share this since I know I can't be the *only* one who's had this issue.

I'm doing a semi-restoration/preservation on my Masi TC. I removed the E-brake pedal assembly to clean it, etc. When I did that, one of the tines (fingers) on the cable retainer broke. At the time, I didn't think anything of it because I SWORE up and down that I'd seen these dumb things for sale.

Fast forward to yesterday. I went looking for said retainer with *almost* no luck! It appears that this dumb part is usually integral to the cable sheath (even though it can come off!).

After quite a bit of searching, I was able to find *1* company that sells it!

www.inlinetube.com

They list it as "MOPAR Parking Brake Collar"

https://www.inlinetube.com/_p/prd14/...collar---pbk03

I need to still order it, so I have no review currently. I don't know if this can be used in the rear where the retainers have 3 "fingers" instead of the "tines", but it might be worth a shot.

Anyways, I hope this might help somebody...