-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
cordes
I ordered up some of them. What's the most common SBECII out there? I would like to get at least one for when I start using JY SBECIIs some day.
Got it Cordes. Thanks.
Not sure which is the most prevalent to find, but I wouldn't order one until you find an SBECII to use.
Miles had a thread in the Electrical Guru forum about how to identify which SBECII you have.
Sent from my ONEPLUS A6000 using Tapatalk
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
wheming
Got it Cordes. Thanks.
Not sure which is the most prevalent to find, but I wouldn't order one until you find an SBECII to use.
Miles had a thread in the Electrical Guru forum about how to identify which SBECII you have.
Sent from my ONEPLUS A6000 using Tapatalk
I have an NOS V6 SBEC which I've been saving for something like this. I'll check it the next time I'm in the basement.
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
wheming
So far only one order has been received for the available single play version.
If anyone has changed their mind about the SinglePlay, could you please update your pre-order?
Since these have to get built to order, it is a bit of a challenge to get ahead in producing some.
Thanks.
Sent from my ONEPLUS A6000 using Tapatalk
So busy haven’t done any TD stuff in months (sorry Miles) but I need to do an inventory and will put in an order. Thanks guys for keeping the club moving forward. I really appreciate it.
Sent from my iPhone using Tapatalk
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
rosie
So busy haven’t done any TD stuff in months (sorry Miles) but I need to do an inventory and will put in an order. Thanks guys for keeping the club moving forward. I really appreciate it.
Sent from my iPhone using Tapatalk
Not a problem as I am working on a number of other TM tasks.
-
Re: New Flash Product Development, and Pre-Order interest
Sheesh, being a total electronic ignoramus, I don't know what I want for my L bodies but I do have boxes of PMs/LMs and SMECs
So, I want in but don't know what I want. Rosie? I'll take an inventory and call ya
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
johnl
but I do have boxes of PMs/LMs and SMECs
Change to SMEC for the win!
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
wheming
1. Cordes (2x) SMEC, S
2. Cordes (1x) SBEC, S
3. knownenemy (2x) SMEC, 4P
4. ilovethecane69 (1x) SBEC, 4P
5. 85LebaronT2 (2x) SBEC, S
6. Aries Turbo (1x) SMEC, 4P
7. GTC (3x) SMEC, 4P
8. DOHCRT (1x) SBEC, S
9. DOHCRT (1x) SBEC2, S
10. rosie (2x) SBEC, 4P
11. rosie (3x) SMEC, 4P
12. inferno1zx (1x) SBEC, 4P
13. turbo_III (1x) SBEC, 4P
14. csxtra (2x) SMEC, 4P
15. eazye426 (1x) SBEC 4P
16. Shmedley (1x) SMEC 4p
17. gkcooper (2x) SBEC2B 652 4P
18. gkcooper (1X) SBEC2A 377 4P
19. gkcooper (1X) SBEC 4P
20. 86Shelby (1x) SBEC 4P
21. Rrider (1x) SMEC 4P
22. bgbmxer (1x) SMEC 4P
23.
24.
25.
Sent from my ONEPLUS A6000 using Tapatalk
I'm jumping on board!
23. Fenderbass (1x) SMEC S
-
Re: New Flash Product Development, and Pre-Order interest
I'll hop on the list too if it's not too late.
1. Cordes (2x) SMEC, S
2. Cordes (1x) SBEC, S
3. knownenemy (2x) SMEC, 4P
4. ilovethecane69 (1x) SBEC, 4P
5. 85LebaronT2 (2x) SBEC, S
6. Aries Turbo (1x) SMEC, 4P
7. GTC (3x) SMEC, 4P
8. DOHCRT (1x) SBEC, S
9. DOHCRT (1x) SBEC2, S
10. rosie (2x) SBEC, 4P
11. rosie (3x) SMEC, 4P
12. inferno1zx (1x) SBEC, 4P
13. turbo_III (1x) SBEC, 4P
14. csxtra (2x) SMEC, 4P
15. eazye426 (1x) SBEC 4P
16. Shmedley (1x) SMEC 4p
17. gkcooper (2x) SBEC2B 652 4P
18. gkcooper (1X) SBEC2A 377 4P
19. gkcooper (1X) SBEC 4P
20. 86Shelby (1x) SBEC 4P
21. Rrider (1x) SMEC 4P
22. bgbmxer (1x) SMEC 4P
23. Fenderbass (1x) SMEC S
24. jrod1231 (1x) SMEC 4P
25. jrod1231 (1x) SBEC 4P
-
Re: New Flash Product Development, and Pre-Order interest
UPDATE!
I have activated the order button for the MultiPlay MPFlash module.
This will help us to use our resources to build the ordered items, rather than build based off the pre-order interest list.
MultiPlay modules will require a switch (or multiple switches) in order to change the active bin slot. This is required not only for running that bin slot but also flashing to it. Since we are still working on the production version switch solution, I still wanted to move forward with us building the modules and it's possible some may even be delivered while we work out the switch system. I can go into more detail if there are questions.
So, as described in the order page,
Http://sites.google.com/view/MPFlash/store
the MultiPlay optioned MPFlash module will have a wire pigtail attached to the module, and will have a weathertight connector that will be outside the ECU housing. So, you see there is only a slight upcharge for the MultiPlay.
The switch/switchpanel and harness wire with mating connector will be available once the final design is determined and priced. Rotary switches are a bit pricey for this so we will see what we come up with to keep costs in mind.
I used simple toggle switches, but that does require 2 in order to get all 4 available bin slots.
If you have any questions, please ask.
Thank you.
Sent from my ONEPLUS A6000 using Tapatalk
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
wheming
UPDATE!
I have activated the order button for the MultiPlay MPFlash module.
This will help us to use our resources to build the ordered items, rather than build based off the pre-order interest list.
MultiPlay modules will require a switch (or multiple switches) in order to change the active bin slot. This is required not only for running that bin slot but also flashing to it. Since we are still working on the production version switch solution, I still wanted to move forward with us building the modules and it's possible some may even be delivered while we work out the switch system. I can go into more detail if there are questions.
So, as described in the order page,
Http://sites.google.com/view/MPFlash/store
the MultiPlay optioned MPFlash module will have a wire pigtail attached to the module, and will have a weathertight connector that will be outside the ECU housing. So, you see there is only a slight upcharge for the MultiPlay.
The switch/switchpanel and harness wire with mating connector will be available once the final design is determined and priced. Rotary switches are a bit pricey for this so we will see what we come up with to keep costs in mind.
I used simple toggle switches, but that does require 2 in order to get all 4 available bin slots.
If you have any questions, please ask.
Thank you.
Sent from my ONEPLUS A6000 using Tapatalk
hey awesome progress, guys!!!
-
Re: New Flash Product Development, and Pre-Order interest
Thanks Chris.
It just seems like everything takes so long to get finished up. This is hobby stuff we are all trying to work in between our normal jobs, family, and other responsibilities.
I know for me personally it has been difficult to find the time with everything else. But we enjoy the sense of accomplishment when we can meet a milestone.
For the MultiPlay customers out there, we should probably have a conversation on the switch options. We have two viable options, simple dual toggle switch setup for a binary type bin selector sequence, or a rotary type switch. A small rotary type switch would probably need to be board mounted, (so that is another small but simple PCB that would be needed), would also need some surface mount diodes on the board.
Simple solutions are cheaper, but the fancier solutions might look better but be more cost.
Since there's a variety of users, it needs to be something that is suitable for everyone.
Unless we have more than one option... Ugh.
Sent from my ONEPLUS A6000 using Tapatalk
-
Re: New Flash Product Development, and Pre-Order interest
Updated the list with those who have paid for their order.
If I missed anyone, or if you have changed your mind, please let me know.
Should be getting the first big batch for those that have paid shipped to me soon!
They are being finished up in our Canadian production facility under strict quality control.
1. Cordes (2x) SMEC, S. PAID
2. Cordes (1x) SBEC, S. PAID
3. knownenemy (2x) SMEC, 4P
4. ilovethecane69 (1x) SBEC, 4P PAID
5. 85LebaronT2 (2x) SBEC, S
6. Aries Turbo (1x) SMEC, 4P. PAID
7. GTC (3x) SMEC, 4P
8. DOHCRT (1x) SBEC, S
9. DOHCRT (1x) SBEC2, S
10. rosie (2x) SBEC, 4P
11. rosie (3x) SMEC, 4P
12. inferno1zx (1x) SBEC, 4P
13. turbo_III (1x) SBEC, 4P
14. csxtra (2x) SMEC, 4P
15. eazye426 (1x) SBEC 4P
16. Shmedley (1x) SMEC 4p
17. gkcooper (2x) SBEC2B 652 4P PAID
18. gkcooper (1X) SBEC2A 377 4P PAID
19. gkcooper (1X) SBEC 4P PAID
20. 86Shelby (1x) SBEC 4P PAID
21. Rrider (1x) SMEC 4P
22. bgbmxer (1x) SMEC 4P
23. Fenderbass (1x) SMEC S PAID
24. jrod1231 (1x) SMEC 4P PAID
25. jrod1231 (1x) SBEC 4P PAID
Sent from my ONEPLUS A6000 using Tapatalk
-
Re: New Flash Product Development, and Pre-Order interest
Wayne, I ordered and paid for mine through the MPFlash store (Under David Dalton)
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
ilovethecane69
Wayne, I ordered and paid for mine through the MPFlash store (Under David Dalton)
Got it, sorry I missed marking it here David.
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
gkcooper
17. gkcooper (2x) SBEC2B 652 4P
18. gkcooper (1X) SBEC2A 377 4P
19. gkcooper (1X) SBEC 4P
Greg, are you sure of your SBECII choices?
They didn't have SBECII in 90, unless you changed something.
I see you said 90 on your ECU year. Would have to be 92+ I think for SBECII
Sent from my ONEPLUS A6000 using Tapatalk
-
Re: New Flash Product Development, and Pre-Order interest
It's all good. I don't have any idea what these came from. I checked the board part #s. They were pulled and socketed years ago.
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
gkcooper
It's all good. I don't have any idea what these came from. I checked the board part #s. They were pulled and socketed years ago.
Ok, thanks.
Just want to avoid errors where possible!
Sent from my ONEPLUS A6000 using Tapatalk
-
Re: New Flash Product Development, and Pre-Order interest
Miles shared this on the FB group, so figured I would share it here for those that wouldn't see.
First batch of MPFlash is almost ready to ship out from our Canadian manufacturing plant. Still need the pin headers, then testing, and then they should be on the way to our distribution hub in NC.
https://uploads.tapatalk-cdn.com/202...416d9257df.jpg
Sent from my ONEPLUS A6000 using Tapatalk
-
Re: New Flash Product Development, and Pre-Order interest
I got the money ready, just need to inventory my SBEC's. If there was a way to pre pre pay I would but I don't want to order the wrong stuffs.
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
rosie
I got the money ready, just need to inventory my SBEC's. If there was a way to pre pre pay I would but I don't want to order the wrong stuffs.
No problem.
It is only the SBECII that is the oddball.
Sent from my ONEPLUS A6000 using Tapatalk