-
New Flash Product Development, and Pre-Order interest
So there have been some hints kicking around in our different media regarding the development of a new product from the same team that brought you the MPSciLink. The prototype should be ready for testing in the next couple/few weeks.
I would like to start a thread here which we can discuss and gather some idea of interest.
I drafted up a product brochure with some information and I will share that here for you to look at.
But, here are some basics.
Introducing MPFlash
A new modular universal flash board for modifying the factory ECU's to make them flashable.
Single PCB design that can be configured for multiple ecu types. Now supports more ECU's than the current BoostButton flash modules available as DIY from Osh Park.
Also available as a MultiPlay flash module to stack 4 different calibrations (bin files) on the module with the additional hardware and wiring for a 4 position switch.
The MPFlash will come fully assembled configured for your ECU type. Will need to be installed in your ECU.
Sent from my ONEPLUS A6000 using Tapatalk
http://cloud.tapatalk.com/s/5ee42ac4...20Brochure.pdf
-
Re: New Flash Product Development, and Pre-Order interest
I'm in for a couple or perhaps many of them depending on price.
-
Re: New Flash Product Development, and Pre-Order interest
We are trying to target around the $40 mark for standard, and with the MultiPlay with the added hardware (connectors, wiring, and 4 position switch, etc.) around the $50, maybe less if possible.
Sent from my ONEPLUS A6000 using Tapatalk
-
Re: New Flash Product Development, and Pre-Order interest
If you would like to be counted, here is a pre-order list. No money being collected yet. This will help us be prepared to ramp up quickly.
Name, ECU type, S or 4P (single play, or MultiPlay) , (add quantity if same ECU, but if different ECU add a new line. Thanks)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Sent from my ONEPLUS A6000 using Tapatalk
-
Re: New Flash Product Development, and Pre-Order interest
Name, ECU type, S or 4P (single play, or MultiPlay) , (add quantity if same ECU, but if different ECU add a new line. Thanks)
1. Cordes
LM, S, 2
SMEC, S, 1
SBEC, S, 1
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
-
Re: New Flash Product Development, and Pre-Order interest
Sorry but LM isn't supported with this module.
You can however use this as motivation to pull a Bucar and upgrade your LM car to a separated SMEC.
Sent from my ONEPLUS A6000 using Tapatalk
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
wheming
Sorry but LM isn't supported with this module.
You can however use this as motivation to pull a Bucar and upgrade your LM car to a separated SMEC.
Sent from my ONEPLUS A6000 using Tapatalk
Dang it. It's a good thing I have a stack of SMECs lying around. I'll adjust my totals.
1. Cordes
SMEC, S, 2
SBEC, S, 1
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
-
New Flash Product Development, and Pre-Order interest
I’m in for 2!!!(SMEC)
I have to go back and read the entire thread for payment details if they’ve been outlined.
FWIW: This is outstanding!!!
1. Cordes
SMEC, S, 2
SBEC, S, 1
2. knownenemy
2X SMEC, 4P
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Sent from my iPhone using Tapatalk
-
Re: New Flash Product Development, and Pre-Order interest
I'm in for 1 smec 4p
- - - Updated - - -
Does the smec require the same installation procedure as the older flash modules with removing potting and attaching to a few spots and bypassing a zener diode?
-
Re: New Flash Product Development, and Pre-Order interest
I'm in for 1 SBEC, Single
1. Cordes
SMEC, S, 2
SBEC, S, 1
2. knownenemy
2X SMEC, 4P
3.ilovethecane69 SBEC, S
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Sent from my iPhone using Tapatalk[/QUOTE]
-
Re: New Flash Product Development, and Pre-Order interest
1. Cordes
SMEC, S, 2
SBEC, S, 1
2. knownenemy
2X SMEC, 4P
3.ilovethecane69 SBEC, S
4. 85LebaronT2 SBEC (2), S
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
Aries_Turbo
I'm in for 1 smec 4p
- - - Updated - - -
Does the smec require the same installation procedure as the older flash modules with removing potting and attaching to a few spots and bypassing a zener diode?
Yes as per
http://www.merkurboys.com/wiki/index.php/Main_Page
-
Re: New Flash Product Development, and Pre-Order interest
If you buy a Single, it is ready for multiplay by adding a switch, connector, two diodes and a wire from the ECU to the cabin
-
Re: New Flash Product Development, and Pre-Order interest
i guess i better copy the list with my name in it rather than just post that i want one so i dont get missed lol
1. Cordes
SMEC, S, 2
SBEC, S, 1
2. knownenemy
2X SMEC, 4P
3.ilovethecane69 SBEC, S
4. 85LebaronT2 SBEC (2), S
5. Aries Turbo (1) SMEC 4P
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
chromguy
If you buy a Single, it is ready for multiplay by adding a switch, connector, two diodes and a wire from the ECU to the cabin
what switch setup are you using for the multiplay versions?
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
crusty shadow
what switch setup are you using for the multiplay versions?
A rotary 4 position switch. It will require two diodes but no PCB like the BB FourPlay switch.
And some wiring to go from the cabin to the MPFlash at the ECU.
We haven't settled on a switch yet. There are a good number of options there.
Sent from my ONEPLUS A6000 using Tapatalk
-
Re: New Flash Product Development, and Pre-Order interest
Gotcha. Not even sure I'm gonna run mine like that till I get all the issues figured out. My fault for liking 7 segment displays lol
Sent from my Pixel 3a using Tapatalk
-
Re: New Flash Product Development, and Pre-Order interest
would be nice if we could send in our ECU's and have the board installled. I can tune but don't have the skills or tools to assemble electronics.
-
Re: New Flash Product Development, and Pre-Order interest
THANKS for all the hard work on this!!
1. Cordes SMEC, S, 2 SBEC, S, 1
2. knownenemy 2X SMEC, 4P
3. ilovethecane69 SBEC, S
4. 85LebaronT2 SBEC (2), S
5. Aries Turbo (1) SMEC 4P
6. GTC (3x) SMEC 4P
7.
8.
9.
10.
11.
12.
13.
14.
15.
-
Re: New Flash Product Development, and Pre-Order interest
Quote:
Originally Posted by
GLHNSLHT2
would be nice if we could send in our ECU's and have the board installled. I can tune but don't have the skills or tools to assemble electronics.
We are trying to develop an outlet for this.
I haven't even tried to modify an ECU yet myself, but I will be.
There are some folks out there who have done some for themselves, and others. But no one is really doing it as a business at the moment.
Sent from my ONEPLUS A6000 using Tapatalk