Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
Yes, PS does fit... the ZF pump for sure, the Saginaw might need some slight bracket massaging. I think I posted pics already?
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
very nice!
Do you think you could make me one with a he351vgt flange? I can provide the flange.
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
How about a built in heat shield mount, or something of the like for the starter? Not sure what the best option would be, but maybe something that can bolt on to diffuse the heat to the starter?
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
Quote:
Originally Posted by
4cefedomni
very nice!
Do you think you could make me one with a he351vgt flange? I can provide the flange.
I think I answered this one before... just wont be able to guarantee fitment to firewall, etc.
Quote:
Originally Posted by
minigts
How about a built in heat shield mount, or something of the like for the starter? Not sure what the best option would be, but maybe something that can bolt on to diffuse the heat to the starter?
When I ran the original prototype on the Z I used thermotec starter wrap w/o issue. I think Summit sells one for pretty cheap now
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
I just wanted to make sure.
Would it help if I sent you a flange now?
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
For now a picture might help, but the flange not needed yet...
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
Quote:
Originally Posted by
BadAssPerformance
For now a picture might help, but the flange not needed yet...
need a stack of flanges :eyebrows:
plasma cutter is still running inconsistant
holes are o.k. because the stainless doesn't harden
but the finish looks like cast iron
Mill is already to go though
:evil:
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
I'll see what I can find. And I'll try and get measurements on the studs and opening.
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
Quote:
Originally Posted by
BadAssPerformance
Yes, PS does fit... the ZF pump for sure, the Saginaw might need some slight bracket massaging. I think I posted pics already?
That was like 6 pages ago, I forgot already, :eyebrows: plus someone could be wondering like me, :D
Quote:
Originally Posted by
minigts
How about a built in heat shield mount, or something of the like for the starter? Not sure what the best option would be, but maybe something that can bolt on to diffuse the heat to the starter?
Just use the DEI or Summit wrap, no need for JT to supply that kind of stuff, ;)
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
Quote:
Originally Posted by
turbovanman
..
Just use the DEI or Summit wrap, no need for JT to supply that kind of stuff, ;)
It wasn't a supply I was inquiring about, but a boss or something welded on the header for a metal shield or something. My questions are about usage and function, not to see what all I can get with it, which is why I asked about the support bracket previously. :)
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
Quote:
Originally Posted by
minigts
It wasn't a supply I was inquiring about, but a boss or something welded on the header for a metal shield or something. My questions are about usage and function, not to see what all I can get with it, which is why I asked about the support bracket previously. :)
Well quit asking all these damn questions, :eyebrows: :amen:
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
Quote:
Originally Posted by
turbovanman
Well quit asking all these damn questions, :eyebrows: :amen:
I CAN'T HELP IT!!!! I have to, otherwise the little things that aren't noticed will continue to go unnoticed! :p I was thinking a couple of mounts for a piece of metal as a shield would be a good idea, but a heat shield wrap would work well too. :thumb:
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
Quote:
Originally Posted by
"Top Fuel" Bender
need a stack of flanges :eyebrows:
plasma cutter is still running inconsistant
holes are o.k. because the stainless doesn't harden
but the finish looks like cast iron
Mill is already to go though
:evil:
Hmmm.. got a pic of the plasma cut finish? is it staight (not tapered) and smooth?
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
Quote:
Originally Posted by
BadAssPerformance
Hmmm.. got a pic of the plasma cut finish? is it staight (not tapered) and smooth?
minor taper that were working on
the finish on the stainless looks like a cinderblock though
trying some different setting next week
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
Quote:
Originally Posted by
"Top Fuel" Bender
I dont think so, the holset vgt is not a twin scroll design. I'll take some pics and measurements next time I go out to my shop.
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
Quote:
Originally Posted by
4cefedomni
I dont think so, the holset vgt is not a twin scroll design. I'll take some pics and measurements next time I go out to my shop.
I believe the mounting holes are the same just no bridge between the the two sides.
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
Could be, I'll still measure it just to make sure
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
I guess there is no posiblity that there will be one ready for my wife to slip under the tree this year?
Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy
Quote:
Originally Posted by
bakes
I guess there is no posiblity that there will be one ready for my wife to slip under the tree this year?
I can be ready. Please send pics of wife.
_____DodgeZ add comments here______