There is a few cars in there, with lots of spare parts and a hoist. http://uploads.tapatalk-cdn.com/2016...7f2d8f0d38.jpg
Sent from my SM-N900V using Tapatalk
Printable View
There is a few cars in there, with lots of spare parts and a hoist. http://uploads.tapatalk-cdn.com/2016...7f2d8f0d38.jpg
Sent from my SM-N900V using Tapatalk
Sweet, can I store some project cars there? ;) My shop is full
AH-UM! And where are we hiding the fork lift to keep it so organized and handy My Friend?
What?? I put a towel down before I started stacking ish on it:D It will live again soon...
In case you need lifters...
http://www.turbo-mopar.com/forums/sh...ht=tiii+lifter
Well I happened to get my block back today, so the build will be starting this upcoming week hopefully.
http://uploads.tapatalk-cdn.com/2016...a8182cfbd7.jpg
Sent from my SM-N900V using Tapatalk
^Those look like the factory freeze plugs Ace, I believe I'd knock those out and install brass plugs...
Made some decent progress today.
http://uploads.tapatalk-cdn.com/2016...109225c95c.jpg
http://uploads.tapatalk-cdn.com/2016...a8208414c6.jpg
http://uploads.tapatalk-cdn.com/2016...9cb5b06ff4.jpg
http://uploads.tapatalk-cdn.com/2016...7a72e4cf46.jpg
http://uploads.tapatalk-cdn.com/2016...297ad64908.jpg
Sent from my SM-N900V using Tapatalk
While you are at it you should port match the oil pump hole to the block. Per Ed Peters there is about 8 HP right there waiting to be unleashed.
Chris-TU
Finished up blocking the balance shafts oil hole, installed pickup tube, oil pan and installed the head today.
http://uploads.tapatalk-cdn.com/2016...a5c759dabd.jpg
http://uploads.tapatalk-cdn.com/2016...4947aae6ec.jpg
http://uploads.tapatalk-cdn.com/2016...bc67cbcbd9.jpg
http://uploads.tapatalk-cdn.com/2016...c79b86a86f.jpg
Sent from my SM-N900V using Tapatalk
More progress
http://uploads.tapatalk-cdn.com/2016...1543a0fdfc.jpg
http://uploads.tapatalk-cdn.com/2016...7c28b57d66.jpg
http://uploads.tapatalk-cdn.com/2016...07d58600a4.jpg
http://uploads.tapatalk-cdn.com/2016...dd0c24b761.jpg
Sent from my SM-N900V using Tapatalk
So I finished doing the Wrx idler mod and I made a mod of my own to replace the stock T3 idler using an Srt 4 idler. Then I installed and set the timing belt tension. http://uploads.tapatalk-cdn.com/2016...267749a5d1.jpg
http://uploads.tapatalk-cdn.com/2016...5336bcf33b.jpg
http://uploads.tapatalk-cdn.com/2016...e35bd46e70.jpg
Sent from my SM-N900V using Tapatalk
So yesterday I installed the motor and did as much as I could hooking everything up, now it's just exhaust and turbo lines pretty much.
http://uploads.tapatalk-cdn.com/2016...176650d66c.jpg
http://uploads.tapatalk-cdn.com/2016...72c8e1e9f4.jpg
http://uploads.tapatalk-cdn.com/2016...8b5fef83fb.jpg
Sent from my SM-N900V using Tapatalk
Someone has been busy! Looks good!