6 Attachment(s)
Scatter Shield - Reeves Racing/Creative Fabrication
Here is the group buy on these scatter shields. This scatter shield is built per NHRA rules and it is mandatory per NHRA rules that you have it if you run faster than 11.50 (!)
This scatter shield is the same I run on my OMNI. It has been tested to fit the 2.2L/2.5L engine family and A-520/A-555 and A-523/A-568.
In it's current configuration, it WILL NOT fit a A-413. One mounting tab would need to be moved. You may also want a wider unit for an auto?
It has not been physically tested to fit the T3 crank sensor, but from measurement testing, it should clear just fine.
It has not been physically tested on a T3 STOCK intake and throttle body configuration, and there looks to be SOME CLEARANCE ISSUES. The throttle body may need to be flipped over or otherwise modified.
This scatter shield includes a timing window cover. (2) bolts will need to be removed to take the cover off so you can see your stock trans timing window.
The scatter shield will come to you unpainted. That way you can choose what color you want and if you want to paint it or get it powdercoated (or leave it bare and oily like mine is).
Go here:
http://www.turbo-mopar.com/forums/sh...lds&highlight=
Or here:
http://www.turbo-mopar.com/forums/sh...l=1#post844921
For more info.
Here is the original mock up:
Attachment 36833
Here it is on my OMNI:
Attachment 36832
Here is the pre-production weight.
Attachment 36831
Here's a shot of it on a A-568:
Attachment 36839
Here is a shot with the timing window cover removed:
Attachment 37015
Here is a shot of the hardware you'll receive if you buy the hardware option:
Attachment 37016
Price will be $150 shipped (shipping limited up to $20....more than that and you'll pay the difference).
Hardware option will be an additional $20 and include all hardware necessary to install.
Payment in full is expected if you want one. Cut-off date for the first group of scatter shields to be made is February 1st, 2012. After that, they may or may not be available, and the price will most likely go up, as we are only buying enough material for the group buy posted here.
Post here and PM me for info on check, money order, or Paypal payments if you want one or more.
Disclaimer:
This is built to NHRA rules ONLY. It is in NO WAY guaranteed to save you or your car in the chance of a flywheel, clutch, flexplate, or torque convertor explosion. This will fit the above transmissions. It is NOT implied that it will fit your turbo, header, intercooler tubing combo, etc. Intercooler plumbing, radiator hoses, heater hoses, throttle bodies, intakes, etc, may need to be modified depending on your setup.
Thanks guys for the interest and motivation to make more of these :thumb:
I'll be updating this orginal post with more fitment pictures soon. I'll be updating the thread with production pictures as production starts.
Here's what I have so far. Make sure you see your name and correct info below.
1) glhs727 - 1 - Hardware???
2) lengel - 1 - No timing window - WITH hardware - PAID - SHIPPED - RECEIVED
3) Turbo3Iroc - 1 - No timing window - WITH hardware - PAID - SHIPPED - RECEIVED - SHIPPED NEW HARDWARE - RECEIVED NEW HARDWARE
4) Onlooker - 1 - WITH Hardware - PAID - SHIPPED - RECEIVED
5) 168glhs1986 - 1 - WITH Hardware - PAID - SHIPPED - RECEIVED
6) Pat - 2 - WITH hardware - PAID - SHIPPED - RECEIVED
7) 4 l-bodies - 1 - NO hardware - PAID - SHIPPED - RECEIVED
8) BadAssPerformance - 3 - WITH Hardware - PAID - SHIPPED - RECEIVED
9) mcsvt - 1- WITH hardware - PAID - SHIPPED - RECEIVED
10) chilort - 1 WITH hardware but no shipping - PAID - RECEIVED
11) contraption22 - 1 - WITH hardware
12) T-Bohn - 1 - WITH hardware - PAID - SHIPPED - RECEIVED
13) 84omni - 1 - WITH hardware - PAID - SHIPPED - RECEIVED
14) onrippinturbo2 - 1 - WITH hardware - PAID - SHIPPED
15) rbryant - 1 - (NO hardware, no timing window) - PAID - SHIPPED
16) tommy - 1 - w/ hardware - PAID - SHIPPED - RECEIVED
17) Shmedley - 1 - WITH hardware - PAID - SHIPPED - RECEIVED
18) Shadow-1- With hardware and timing window - PAID - SHIPPED
19) Daver-1 - with hardware and timing window - PAID - SHIPPED
20) DOHCRT - 1 - No Hardware - PAID - SHIPPED
Re: Scatter Shield - Reeves Racing/Creative Fabrication
I'll take 3. One for a a568 with crank sensor, one for a a413/2.2 and one for a a413 with 2.4 motor.......
Re: Scatter Shield - Reeves Racing/Creative Fabrication
I will take one with the hardware option. Is it possible to have my sheild made with no timing window cut out? Ill will pm you in a few min. Thanks for doing this for us james!
Adam
Re: Scatter Shield - Reeves Racing/Creative Fabrication
Sign me up! Price is very reasonable. I would also like the non window option if available. PM on the way.
Re: Scatter Shield - Reeves Racing/Creative Fabrication
Re: Scatter Shield - Reeves Racing/Creative Fabrication
Re: Scatter Shield - Reeves Racing/Creative Fabrication
Quote:
Originally Posted by
glhs727
I'll take 3. One for a a568 with crank sensor, one for a a413/2.2 and one for a a413 with 2.4 motor.......
Cindy, I'll gladly make you 3, but it has not yet been fit to a A-413. I need to get to my transmission storage shed to get one out and test fit it on the mockup stand. I do believe it will fit, but I know the bellhousing area on the A-413 is quite different. I will update this thread when I get this done.
Quote:
Originally Posted by
lengel
I will take one with the hardware option. Is it possible to have my sheild made with no timing window cut out? Ill will pm you in a few min. Thanks for doing this for us james!
Adam
Quote:
Originally Posted by
Turbo3Iroc
Sign me up! Price is very reasonable. I would also like the non window option if available. PM on the way.
Yes, I can leave out the timing window.
Quote:
Originally Posted by
OnLooker
I'll take 1
PM responded to!
Quote:
Originally Posted by
168glhs1986
1 for me please
Send PM please for payment info.
Re: Scatter Shield - Reeves Racing/Creative Fabrication
Hey James....don't forget I am in for two! PM me your PayPal addy. Thanks for getting this together for us. It's definitely a need for the community.
For you guys racing or running these cars hard, this a very smart,low cost investment for safety.
Re: Scatter Shield - Reeves Racing/Creative Fabrication
Quote:
Originally Posted by
Reeves
Cindy, I'll gladly make you 3, but it has not yet been fit to a A-413. I need to get to my transmission storage shed to get one out and test fit it on the mockup stand. I do believe it will fit, but I know the bellhousing area on the A-413 is quite different. I will update this thread when I get this done.
The starter is in the front on a 2.4. Will that make a difference?
Re: Scatter Shield - Reeves Racing/Creative Fabrication
James, put me down for one without hardware. Thanks for making these available to us in a group buy. Very resonable price!
Todd Nelson
Re: Scatter Shield - Reeves Racing/Creative Fabrication
Re: Scatter Shield - Reeves Racing/Creative Fabrication
Quote:
Originally Posted by
contraption22
The starter is in the front on a 2.4. Will that make a difference?
It won't be an issue if you have a A568 (starter on back) ... I put it on my 2.4L/A568 to be sure of this. As James noted above, its for the 520/555/523/568's. It was not designed for or tested on the T350/T850 trans' and would need significant modifications to align with the trans hole that lines up with the front ear of the 2.4L block
Re: Scatter Shield - Reeves Racing/Creative Fabrication
Hey folks... Lets try to keep this organized for Reeves as a running list like we do for other Group Buys. Also, don't for get to confirm if you want hardware or not! If you do not, please read the NHRA rule book on hardware requirements!
1) glhs727 - 3 (need to check 413's) - (Hardware???)
2) lengel - 1 - No timing window? - WITH hardware
3) Turbo3Iroc - 1 - No timing window? - (Hardware???)
4) Onlooker - 1 - (Hardware???)
5) 168glhs1986 - 1 - (Hardware???)
6) Pat - 2 - (Hardware???)
7) 4 l-bodies - 1 - NO hardware
8) BadAssPerformance - 2 - WITH Hardware
9)
10)
11)
12)
13)
14)
Re: Scatter Shield - Reeves Racing/Creative Fabrication
Quote:
Originally Posted by
BadAssPerformance
It won't be an issue if you have a A568 (starter on back) ... I put it on my 2.4L/A568 to be sure of this. As James noted above, its for the 520/555/523/568's. It was not designed for or tested on the T350/T850 trans' and would need significant modifications to align with the trans hole that lines up with the front ear of the 2.4L block
But Cindy requested one for a 2.4/auto. I would assume that she meant for use with a neon 31th.
Re: Scatter Shield - Reeves Racing/Creative Fabrication
Quote:
Originally Posted by
BadAssPerformance
Hey folks... Lets try to keep this organized for Reeves as a running list like we do for other Group Buys. Also, don't for get to confirm if you want hardware or not! If you do not, please read the NHRA rule book on hardware requirements!
1) glhs727 - 3 (need to check 413's) - (Hardware???)
2) lengel - 1 - No timing window? - WITH hardware
3) Turbo3Iroc - 1 - No timing window? - (Hardware???)
4) Onlooker - 1 - (Hardware???)
5) 168glhs1986 - 1 - (Hardware???)
6) Pat - 2 - (Hardware???)
7) 4 l-bodies - 1 - NO hardware
8) BadAssPerformance - 2 - WITH Hardware
9)
10)
11)
12)
13)
14)
Wow! Thanks JT! That's way better! I was just keeping a word document of them all. LOL
Also, Jeremy (Chilort) your PM box is full.
I will update with a hardware picture soon. It may be a couple days as I am in Lima, OH till Friday, then a trip to Michigan this weekend, then off to Texas next week. I'll try like heck to get the pic of the hardware and pics of fitment on a A-413.
Re: Scatter Shield - Reeves Racing/Creative Fabrication
Quote:
Originally Posted by
Reeves
Also, Jeremy (Chilort) your PM box is full.
Fixed it. Sorry.
Re: Scatter Shield - Reeves Racing/Creative Fabrication
1) glhs727 - 3 (need to check 413's) - (Hardware???)
2) lengel - 1 - No timing window? - WITH hardware
3) Turbo3Iroc - 1 - No timing window? - (Hardware???)
4) Onlooker - 1 - (Hardware???)
5) 168glhs1986 - 1 - (Hardware???)
6) Pat - 2 - (Hardware???)
7) 4 l-bodies - 1 - NO hardware
8) BadAssPerformance - 2 - WITH Hardware
9) mcsvt - 1- WITH hardware
10)
11)
12)
13)
14)
Re: Scatter Shield - Reeves Racing/Creative Fabrication
168glhs1986 updated with no hardware and pm sent.
1) glhs727 - 3 (need to check 413's) - (Hardware???)
2) lengel - 1 - No timing window? - WITH hardware
3) Turbo3Iroc - 1 - No timing window? - (Hardware???)
4) Onlooker - 1 - (Hardware???)
5) 168glhs1986 - 1 - no hardware
6) Pat - 2 - (Hardware???)
7) 4 l-bodies - 1 - NO hardware
8) BadAssPerformance - 2 - WITH Hardware
9) mcsvt - 1- WITH hardware
10)
11)
12)
13)
14)
Re: Scatter Shield - Reeves Racing/Creative Fabrication
Quote:
Originally Posted by
Reeves
Wow! Thanks JT! That's way better! I was just keeping a word document of them all. LOL.
LOL, Glad you like! It worked well that way for the Calendar thread too!
Re: Scatter Shield - Reeves Racing/Creative Fabrication
1) glhs727 - 3 (need to check 413's) - (Hardware???)
2) lengel - 1 - No timing window? - WITH hardware
3) Turbo3Iroc - 1 - No timing window? - (Hardware???)
4) Onlooker - 1 - (Hardware???)
5) 168glhs1986 - 1 - no hardware
6) Pat - 2 - (Hardware???)
7) 4 l-bodies - 1 - NO hardware
8) BadAssPerformance - 2 - WITH Hardware
9) mcsvt - 1- WITH hardware
10) chilort - 1 WITH hardware but possibly no shipping
11)
12)
13)
14)