-
8 Attachment(s)
97 Stratus 2.4, 420A heads, intakes, header, GLH block, DD MBC, etc. - pics!
I'm changing project directions, so I'm putting my 2.4 stuff up for sale.
Up for sale is:
- A 2.4 out of a '97 Stratus (dis-assembled but complete, minus head), had 97k on it when pulled - $150 obo
- (3) 420a cylinder heads (that's the Eclipse/Avenger version of the DOHC Neon head); one of the heads is missing many of the cam caps - I was planning to use it for porting experimentation. All have valves/springs. - $75/ea for the good heads; - $25 for the one missing cam caps SOLD
- ADDED: 420a valve cover (nearly the same as a Neon, but the spark plug holes are offset ~2mm due to the different head) - $25
- 1 set of "PT" style cam followers (rockers) CORRECTION : There's only 14 of them - $25
- 1 set of non-PT style lifters - $25 obo
- 2 sets of stock cam gears - $10 obo
SOLD - Neon DOHC aluminum intake (unmolested, but dirty) - $35 obo
- 420a Intake (also unmolested but dirty) - $35 obo
SOLD - Stratus intake cut to just the runners (make a good starting point for a custom intake) ; EDIT: also t-stat housing is cut for use with the 420a heads above - $10
- a couple of 420a T-Stat housings - $10/ea
- Brand new 2.4 oil pump - $40
- Pacesetter 420a header - $50
- 2 sets of 2.4 cams - $25/all
- Neon 3-speed auto trans core to bolt up to the 2.4 (slips in 1st gear) w/torq converter - $25
- Neon billet aluminum UDP - $20
- 420a OBX Billet fuel rail (red) - $50 obo
- ADDED: (2) Caravan 2.4 Alt brackets w/hardware; fits the TD alt if you drill out the lower mount on the alt and lines up with the Neon UDP listed above, $10/ea
Plus shipping on the individual parts.
I'll still take $400 for everything left - pickup only obvioulsy...
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
More info on the pump please. What brand? What style pump is it? Which generation motor?
later
Quote:
Originally Posted by
ShelGame
- Brand new 2.4 oil pump - $40
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
It's the same as the original '97 Stratus pump, and it's a new Mopar part...
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
What size is the fuel rail? -10?
EDIT: also, got a pic of one of the heads? Do those flow opposite?
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
Quote:
Originally Posted by
BadAssPerformance
What size is the fuel rail? -10?
EDIT: also, got a pic of one of the heads? Do those flow opposite?
The fuel rail is setup to use the stock 420a fuel fittings, I think. Though, it does have threads on one end. Not sure the size, but it's at least -8, maybe -10. The other end looks like it's setup for the FPR and/or damper.
Pics added; It's identical to the older Neon DOHC head, but the intake/exhaust ports & cams are reversed front to back. The T-stat is in the same location, though, and uses a separate housing (since it's next to the exhaust, not the intake).
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
Got time to burn a cal?:eyebrows:
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
Do you already have the cal? Or do you need me to make one? I could probably do one, but I'm way behind on an LM/cal now. PM me what you need...
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
I'm interested in a couple things but kind of busy this week and the wheather sucks, i'll keep an eye on this thread and let you know if/when I can come over to pickup
Do you have a pic of the cut intake, or how long are the runners left?
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
Quote:
Originally Posted by
ShelGame
The fuel rail is setup to use the stock 420a fuel fittings, I think. Though, it does have threads on one end. Not sure the size, but it's at least -8, maybe -10. The other end looks like it's setup for the FPR and/or damper.
I'd need the -10 on both ends... sounds like a nice rail for the price tho!
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
I'll take the following parts:
420a cylinder head; one of the heads is missing many of the cam caps $25 for the one missing cam caps
- Stratus intake cut to just the runners (make a good starting point for a custom intake) - $10
Does PayPal work for you? If so, LMK the addy. As for shipping, I can email you a UPS label once I have the ship from address and the weights of the boxes. Then it's just a matter of giving it to the closest UPS driver.
Thanks!
Mike
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
Quote:
Originally Posted by
Speedeuphoria
I'm interested in a couple things but kind of busy this week and the wheather sucks, i'll keep an eye on this thread and let you know if/when I can come over to pickup
Do you have a pic of the cut intake, or how long are the runners left?
I left them as long as I could keeping as much of the straight section. I'd say 5-6", but the cuts aren't straight (hack saw). To put a plenum on there, you're probably looking at `4" of straight section. Also, I cut the t-stat housing off the intake, so this will work only with the 420a heads now...
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
Quote:
Originally Posted by
zin
I'll take the following parts:
420a cylinder head; one of the heads is missing many of the cam caps $25 for the one missing cam caps
- Stratus intake cut to just the runners (make a good starting point for a custom intake) - $10
Does PayPal work for you? If so, LMK the addy. As for shipping, I can email you a UPS label once I have the ship from address and the weights of the boxes. Then it's just a matter of giving it to the closest UPS driver.
Thanks!
Mike
Sounds good. See my EDIT above, though, about the Stratus intake and let me know if you still want it. That head, BTW, is the one in the pics above. It was the easiest to get off the shelf...
PayPal is fine. roblloyd -at- charter.net
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
If you still have the PT followers, please let me know. I would like to get them.
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
I still have everything....
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
Quote:
Originally Posted by
ShelGame
I left them as long as I could keeping as much of the straight section. I'd say 5-6", but the cuts aren't straight (hack saw). To put a plenum on there, you're probably looking at `4" of straight section. Also, I cut the t-stat housing off the intake, so this will work only with the 420a heads now...
Cant it work w/ one of the T-stat housings on a neon head? Or if the housings are different then w/ a PT stat housing?
Also interested in the auto trans fwiw
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
Quote:
Originally Posted by
Speedeuphoria
Cant it work w/ one of the T-stat housings on a neon head? Or if the housings are different then w/ a PT stat housing?
Also interested in the auto trans fwiw
Maybe, I think you only get 2 of the 3 bolts, though. I never tried when I had a "real" Neon head on the shelf.
Trans is all yours, if you want it...
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
PMed you on the Neon intake. Let me know..
Later
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
Quote:
Originally Posted by
ShelGame
Sounds good. See my EDIT above, though, about the Stratus intake and let me know if you still want it. That head, BTW, is the one in the pics above. It was the easiest to get off the shelf...
PayPal is fine. roblloyd -at- charter.net
That shouldn't be a big issue, I'll either use it with a 420 head or as a mock up for a sheet metal, either way it should be worth the $10.00. I've paypal'd the $$ to you just now.
I will need your address for the shipping label, they gotta know where it's coming from!
Thanks!
Mike
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...
Quote:
Originally Posted by
zin
That shouldn't be a big issue, I'll either use it with a 420 head or as a mock up for a sheet metal, either way it should be worth the $10.00. I've paypal'd the $$ to you just now.
I will need your address for the shipping label, they gotta know where it's coming from!
Thanks!
Mike
PM sent! Thanks!
Everyone, for the future, please include the parts you're buying in the PayPal note.
BTW, mods - I LOVE the ability to edit these for sale posts!
-
Re: 97 Stratus 2.4, 420A heads, inakes, header, and Neon 31th trans...