Need a set of rear coil mounts/bump stops ( the ones inside the coil springs) and the upper and lower spring isolators for my 88 CSX-T.
Thanks
Printable View
Need a set of rear coil mounts/bump stops ( the ones inside the coil springs) and the upper and lower spring isolators for my 88 CSX-T.
Thanks
https://i.ibb.co/FKp8vbC/IMG-2052.jpg
Mounts are what I need the most, car is stuck on jack stands without them.
Thanks!
Johnny @ polybushings has the upper and lower spring insulators.
You may be better off posting a want ad on the SDAC Facebook page. That’s where everyone is these days.https://m.facebook.com/groups/144764222259820
Joey It looks like there where two different jounce bumper cups, a 1 notch and a three notch? On your pics it looks like you maybe have the three notch cups. That would be part # 4228440. Part # for 1 notch cup is 4228096.
Jounce bumper is 4228159
Upper spring isolator is 4147759
Todd
Thanks for the information guys, I have asked my wife to join the facebook group since she has an account...I will check out polybushings and get the isolators. Thanks for the part numbers Todd, I found them yesterday and called multiple dealers all numbers are discontinued and no stock listed at any dealer. Also looked on Arizona parts and Brad's NOS...nothing comes up for the cups.
Just ordered the isolators from Johnny, thanks! If anyone knows of anyone parting a K based car please lmk!
As Todd said there a multiple cups. The part number for the Shelby specific cup is 4421072, the other is the 4228159, I'll take either!
If exact OEM appearance was not a concern those would be not too difficult to make with plate stock and round tube. Mine are somewhat crunchy and even on southern cars they catch moisture and rot from the inside.
Desert Valley Auto Parts had a set off a 86 Dodge 600 convertible, hopefully they are the same. They'll take up to two weeks to get but at least I found them.
https://www.dvap.com/salvage/1986-dodge-600-86donv07e/
In case anyone needs anything else.
I cut eown some coil over springs and welded them in place of the bump stops. In
- - - Updated - - -
On Rampage, i cut down some coil over springs and welded them to the axle in place of the bump stops
I have a 94 Shadow flying to pieces in the next week or so. Rust free AZ car, everything available.