Turbonetics 50 trim .63 A/R

Date: 30th April 2019
Username: 16vGLHS
City, State, Zip: Turbo ships from South Florida
Contact: PM me for payment details
Price: $450 + shipping
Here are the specs on this unit:

Turbonetics Dynamic VSR Balanced Turbocharger
.63 A/R turbine housing with stage III turbine shaft
50 trim cold side in T04E compressor cover
Wet CHRA (i.e. coolant and oil cooled)

Notes: It has a *little* play but I don't see any damage to any of the fins. As a precaution, I would advise you rebuild it before installing it however, it came off a running, driving Iroc R/T that was pulling hard (21psi peak). There are a couple of bolts that snapped on the exhaust housing when the downpipe was removed (where swing valve or ATP downpipe attaches). If you want to pay me to extract them, contact me for additional cost. Otherwise, do it yourself and save the $$.

If you want the downpipe that was attached to this turbo I'll post it in another ad here shortly. It was basically a Turbonetics swing valve housing with a 2.75" exhaust pipe welded to it and made to fit the Iroc R/T and Spirit R/T engine bay.

This is a *perfect* turbo for someone wanting to do a Turbo III performance build. I've been running this combo for years and it works awesome on an Iroc R/T or Spirit R/T. These are typically good for up to 550whp depending on what your peak boost is....of course you can stretch that higher if you turn the boost way up.

If you disagree with my price PM an offer. First come first served.
http://www.turbo-mopar.com/forums/at...id=64027&stc=1http://www.turbo-mopar.com/forums/at...id=64028&stc=1http://www.turbo-mopar.com/forums/at...id=64029&stc=1http://www.turbo-mopar.com/forums/at...id=64030&stc=1http://www.turbo-mopar.com/forums/at...id=64031&stc=1http://www.turbo-mopar.com/forums/at...id=64032&stc=1http://www.turbo-mopar.com/forums/at...id=64033&stc=1