36-1 wheel ring for the common block 8 valve crank
Date: 27th November 2017
username: tryingbe
full name: harry lui
city, state, zip: mesa, az 85204
contact: tryingbe@yahoo.com
This is what you need if you plan to go megasquirt/microsquirt on your common block 8 valves.
Looking for $50 + shipping. I have ONE left, no plan to make more. If you even remotely thinking about going to MS, buy it now.
You'll need to fully welded to your crank and have it balanced.
You'll also need to make your own crank sensor bracket.
This is what you'll be receiving, one of the ring. This part is tested on 8 valve common block pulley only.
http://www.thelostartof.net/tryingbe...e/36-1ring.jpg
examples
spot welded to the crank
http://thelostartof.net/tryingbe/dod.../36-1crank.jpg
Re: 36-1 wheel ring for the common block 8 valve crank
What's the inside diameter of it cut like that?
Re: 36-1 wheel ring for the common block 8 valve crank
Re: 36-1 wheel ring for the common block 8 valve crank
Dang, that wont fit my crank pulley.. free bump!