23 Attachment(s)
NOS TIII Proto head, NOS G head & 50 Trim FS
Date: 23rd April 2019
Username: moparloper
Full Name:Jim Loper
City, State, Zip:Wales, MA 01081
Contact: PM for contact
Price:See list
Description: It has come time to part with items I have as back-ups. I don't have time for the primary units so, its time to sell the secondary items.
1. NOS TIII Prototype complete head. This is a complete NOS head; Head, Valves, Cams, Springs, Lifters, Rockers and Gears. Prototype head identified by pad between rockers and 6 hole gears. These heads have extra material around ports according to "5digits". $2K shipped. Sold
2. 50 Trim turbo; I purchase this from Warren S. approx 4 years ago. He rebuilt and balanced it. It has been ported and an angled neck welded in place also includes actuator bracket. Turbine housing is a 0 Stage and includes heli-coils on 2 of the flange holes. Sold
3. NOS G Head; Bare head, untouched. Has for some reason white & green paint on it, comes right off W/brake clean. Sold
PayPal preferred. PM for any questions. Thanks
http://www.turbo-mopar.com/forums/at...=63996&thumb=1 http://www.turbo-mopar.com/forums/at...=63995&thumb=1 http://www.turbo-mopar.com/forums/at...=63994&thumb=1 http://www.turbo-mopar.com/forums/at...=63992&thumb=1 http://www.turbo-mopar.com/forums/at...=63991&thumb=1 http://www.turbo-mopar.com/forums/at...=63990&thumb=1 http://www.turbo-mopar.com/forums/at...=63989&thumb=1 http://www.turbo-mopar.com/forums/at...=63988&thumb=1 http://www.turbo-mopar.com/forums/at...=63987&thumb=1 http://www.turbo-mopar.com/forums/at...=63986&thumb=1 http://www.turbo-mopar.com/forums/at...=63985&thumb=1 http://www.turbo-mopar.com/forums/at...=63984&thumb=1 http://www.turbo-mopar.com/forums/at...=63983&thumb=1 http://www.turbo-mopar.com/forums/at...=63982&thumb=1 http://www.turbo-mopar.com/forums/at...=63981&thumb=1 http://www.turbo-mopar.com/forums/at...=63980&thumb=1 http://www.turbo-mopar.com/forums/at...=63979&thumb=1 http://www.turbo-mopar.com/forums/at...=63978&thumb=1 http://www.turbo-mopar.com/forums/at...=63977&thumb=1 http://www.turbo-mopar.com/forums/at...=63976&thumb=1 http://www.turbo-mopar.com/forums/at...=63975&thumb=1 http://www.turbo-mopar.com/forums/at...=63974&thumb=1
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
Unfortunately, poor choice for where I work because of a very poor choice in a spouse!
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
I was just surprised all these years I don't think I've ever run into you. The NE club does have some get togethers. Summer BBQ at Jonny's in Vernon is a popular one.
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
The last several years I've been working at start-up medical device companies which has left me with no time for hobbies. I work in Nashua right now so, if I'm not driving I'm working. This is why I've decided to let things go.It will be a few more years where I'm at and if it works out, I'll be moving west after that. It would be nice to attend car shows and events again!
There will be more parts posted as I get time.
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
Appears to be a MP G head, I didn't know they were available bare.
Good score for someone!!
Thanks
Randy
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
Pretty cool stuff! I can tell it's the real deal TIII prototype by the lack of air box attachment bosses like the production ones got. What happened to the proto short-block?
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
Never saw a short block. You can tell it was mocked up but, never a head bolt placed in it.
When I first got them, I wasn't up on what made it a proto-type. The valve covers where definitely pre-production. Then I saw a write up on "Jackson's" page that mentioned the 6-hole gears. What made it as you said "the real deal", are the lack of air box bosses and the pad/boss between the rockers. 5digits verified that information.
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
Jim,
I feel the same press for free time, but if you need a hand with anything I'm in the area.
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
Yeah, you can almost tell how many times it's been bolted down by the witness marks of the head bolt washers. Certainly a good buy for someone. NOS and damn near perfect. I have a TIII prototype engine. It came with the "Shelby" valve cover though. I will have to look and see if mine had 6-hole gears.
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
Dan,
I wish I knew you 5 years ago, I could of banged out the projects that are now lingering. I really appreciate the offer!
iTurbo,
I would be interested in knowing what is different in the short block from production. The valve covers went to Lengel in a trade for TIII items. I have a fear that no matter how nice things are, this community is quickly disappearing so, big ticket items are going to be a tough sell.
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
Sent a PM regarding the turbo.
Sent from my Pixel 2 XL using Tapatalk
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
I replied to your PM just after you sent it. Have you received it?
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
Replied. Looking forward to the shipping quote tomorrow.
Sent from my Pixel 2 XL using Tapatalk
Re: NOS TIII Proto head, NOS G head & 50 Trim FS
Quote:
Originally Posted by
moparloper
The last several years I've been working at start-up medical device companies which has left me with no time for hobbies. I work in Nashua right now so, if I'm not driving I'm working. This is why I've decided to let things go.It will be a few more years where I'm at and if it works out, I'll be moving west after that. It would be nice to attend car shows and events again!
There will be more parts posted as I get time.
I know a medical device guy that lives out west and goes to a lot of shows;)
