need bulkhead diagrams for 89 p-body
the link for the download doesn't work anymore so i need the diagram for the 3 plugs under the dash that connect the engine harness to the dash
and the other for the diagram for the rear harness to the dash would be helpful to have as well (plug located in driver side kick panel )
Re: need bulkhead diagrams for 89 p-body
I can possibly scan the pages from my FSM and post them.
I just went through this myself. The donor harness for my Scamp came from an 89 P body, but my memory certainly isn't good enough to remember all that...:)
Re: need bulkhead diagrams for 89 p-body
I can't recommend enough to buy a set of FSMs from eBay. Both for the '89 and whatever else especially as far as swaps are concerned.
Thankfully it isn't as hard as you might think to swap stuff. Most everything is compatible on a circuit level, but wiring colors/tracers can change from year to year, and option content is different between cars. It's actually a piece of cake once you get into it.
Re: need bulkhead diagrams for 89 p-body
Quote:
Originally Posted by
iTurbo
I can't recommend enough to buy a set of FSMs from eBay. Both for the '89 and whatever else especially as far as swaps are concerned.
Thankfully it isn't as hard as you might think to swap stuff. Most everything is compatible on a circuit level, but wiring colors/tracers can change from year to year, and option content is different between cars. It's actually a piece of cake once you get into it.
+1. Having FSM's for both years made the harness work a TON simpler. I probably could have figured it out eventually, but instead of taking weeks, I did it in about 4 evenings...
Re: need bulkhead diagrams for 89 p-body
Quote:
Originally Posted by
83scamp
+1. Having FSM's for both years made the harness work a TON simpler. I probably could have figured it out eventually, but instead of taking weeks, I did it in about 4 evenings...
Call me strange, but I actually think of it as one of the funner parts of a big swap. That reminds me, I still gotta finish the headlight conversion and wiper wiring on the SL with TC harness. And look into reintegrating the PDC.
Re: need bulkhead diagrams for 89 p-body
yea i was going to just buy the fsm but i remembered someone had them posted before, i guess ill just buy them i mainly was churious if the 89 and 90 shadow dash harness was the same, also if i could use the 87 taillight harness with it