Printable View
Other than having custom wheels made has anyone run across wheels that will bolt to our 5X100 hubs in a 9 or 10 inch width. I prefer a larger wheel diameter ( 16-17" ) but would considering anything. I know it will stick out and look funny but I have plans for that.
Why not switch to 5x114? There are a lot more options out there in that pattern. It looks like you could get some RPF1s in that width with that pattern.
I have 16x8 +25 on my lancer and they fit good. A 9" wheel would be a little tougher. They would definitely stick out in the front. Mine even stick out a little bit.
What I have read it is not a straight swap over. Of course I could have missed something.Quote:
Originally Posted by cordes
- - - Updated - - -
Not concerned about them sticking out. Plan on doing some body work.Quote:
Originally Posted by thedon809
The front swap is a direct bolt on if you have the 91+ knuckles in the car. The rear doesn't take a ton of work and there are a few ways to go about it. I know people have used the Neon stuff and the LHS/Intrepid setup.
ARE torque thrust 5x100
www.google.com/search?q=ARE+torquethrust+wheels+5+x+100+16+x+7&hl =en-GB&sourceid=gd&rlz=1Q1GGLD_enCA728CA728
the wheels I've been looking at come in 16x7 for dodge neon and 17 x 7
www.ebay.com/p/American-Racing-Ar105-Torq-Thrust-M-16x7-Custom-Wheel-Rim/1143789878?iid=283437863196&rt=nc
I'd presume wider versions might be available - I know they do come as 18's
and for that round center cap there's an optional one you can get from summit with the ARE logo , the SHELBY logo and shelby's traditional snake in the background .. if you wanna go there
www.ebay.com/itm/American-Racing-Shelby-Chrome-Black-Wheel-Center-Hub-Cap-Carol-Torq-Thrust-/273213732802
there a different version available in 5x114 WITH the old style hex shaped center cap
(the cap that looks like a nut , NOT the cap held on with five screws , and not the one linked to above with the five fake screws)
those I'm sure come any width but the offset might become a problem (Idono, yet)
www.google.com/search?q=ARE+torquethrust+5x114+16+x+9&hl=en-GB&sourceid=gd&rlz=1Q1GGLD_enCA728CA728
and different , five spoke , 5x100 and 18x9
http://www.americanracing.com/produc...black-machined
another , 17 x 9 or 10 and "custom bolt pattern "
http://www.americanracing.com/produc...inish=polished
Thank You. These are sites I had not been to. Gives me some options.